Question about Toshiba PDR-5300 Digital Camera

1 Answer

The lense stays out and could not return back. The screen shows "ERROR 3".

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dropped my camera and since then I can take photos, the camera focuses, my display is fine when viewing previously shot images and the normal display information but when the shutter is pressed all o see...


When you take off the lens and fire off a shot, does the mirror go up and return or does it stay up? If not, is it possible that it is staying up when the lens is connected? When you fire a shot, can you hear it returning?

Sep 19, 2010 | Canon EOS 400D / Rebel XTi Digital Camera

2 Answers

Does it take some type of gel under the lights, the colors are a little blurry


i also have this tv. i removed backcleaned mirrior, back of screen and lenses VERY GOOD. Then turned on tv go to convergence, sepaerate cross hairs then adjust focus on lenses. Then lenses rotate maybe about a 1/3 turn total by hand. Grab ring that houses lenses and turn until cross hairs are as clear as possible. This can be done with out help by watching inside of screen. red and green are adjustable, the blue is adjustablealso but i couldnt find blue cross hairs, maybe by covering red and green lenses the blue will show on screen. anyway when done and cross hairs are clear,lenses, mirror and screen are clean, you can adjust covergence and get a very clear screencleaning will also brighten pic. Pete

Mar 27, 2010 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Ps3 show red screen serious error


i just turned on my ps3 today and there was a red screen that said " there was a serious error and i need to call technical support for assistance" in different languages. it wont let me do anything else it just stays in that screen. I cant even go to my menu. Please if anybody has any advice write back!!!!!!!!

Jul 10, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Hellp?!


How old is your camera? Is it still under warranty?

From everything i have read, the "Lense Error" is a common defect in these cameras.
Hopefully you will be able to return it and have it repaired for free for you.

Sorry i couldn't be more of a help.
Good Luck.

Apr 21, 2008 | Nikon Coolpix L11 Digital Camera

1 Answer

Resolution


You need to enter a lower resolution. The monitor you are on is incapable of using a resolution that high. If you cannot get back on you need to start in safemode. Then change the resolution to a lower one that your monitor can handle.

Feb 25, 2008 | Gateway FPD2275W LCD Monitor

1 Answer

"lens error" on casio ex-z3


Sorry to say but a lens error actually is a problem that you cannot fix at home. When a lens error occurs, the motors inside that make the lens retract and protract were some how damaged, usually caused if the lens try coming out when you have it in your pocket or against a surface so it cant fully come out. You will have to send the camera in for service and you can do that by calling 1-800-706-2534, option 1.

Oct 19, 2006 | Casio Exilim EX-Z3 Digital Camera

Not finding what you are looking for?
Toshiba PDR-5300 Digital Camera Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Cameras Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Toshiba Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...