Question about Kenmore Washing Machines
F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).
All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 14, 2010
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 21, 2014 | Whirlpool Duet GHW9150P Front Load Washer
Aug 19, 2014 | Sears Washing Machines
Dec 10, 2013 | Kenmore Elite HE5t Washer
Aug 01, 2011 | Kenmore Elite HE5t Washer
Oct 23, 2009 | Kenmore Elite 45986 Front Load Washer
Jun 26, 2009 | Kenmore Elite 45986 Front Load Washer
Nov 23, 2008 | Kenmore Elite 45986 Front Load Washer
200 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: