Question about Televison & Video

1 Answer

DVD PROBLEM Your recent solution was right for the DVD player? You got rated as Fixya!? Your solution made no sense at all and you are not even using English. You just took ideas from my post and made your own and it still made no sense. Did you rate your own solution because no one in their right mind would have thought yours was a "Fixya!"

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

No brother.
please see to that i posted it in correct English only.
bt few spelling mistakes and some short forms.

also i swear that i dint even read ur solution till i saw ur request here.

only after seeing ur request here i went back and read what u posted. i never copy solutions.
i wil sometimes copy the statements like
"Good luck,
Please don't forget to rate or accept the solution."".
but i never copy solutions. i have not did that ever since i came to fixya.

i dont know what is so bad in my solution. why are u rating it so bad?

Posted on May 15, 2008

  • 2 more comments 
  • dewan nafees ahmed May 15, 2008

    also i said my statement in my own analysis
    and u can see that from my post also.
    how come u arrive at solution tat i have copied from u??

    anyone reading my post can tell that it is now where copied frm ur post.
    well
    but the ultimate solution of both was "software problem" .. which does not men i copied frm u.. if i had copied from u i could not explain it so clearly as i have did there..


  • dewan nafees ahmed May 15, 2008

    also i cant rate that solution.
    its totally dependent upon asker.

    in fact no expert can rate his own solution in premiums.


  • dewan nafees ahmed May 15, 2008

    please reply night71

  • dewan nafees ahmed May 16, 2008

    u dint reply anything night71...

    what shalli take this silence as??

    can u tell me what part of statement was bad english?? (except for spelling mistakes and short forms).. i would like to learn english from u from now i think.. u seem to be masters..

    i want some reply from u..


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have a dvd player or external dvd player to play the cd/manual,how do i install my wifi router instead?


You can get the installation manual on line. Just clarify me your router's model in order to get you to the exact link, or use this link and locate it by yourself.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 11, 2011 | Belkin (F5D5231-4) Router

2 Answers

How do i connect my laptop to my dvd player using hdmi cable


The HDMI connector at your laptop is output. The HDMI connector at the DVD player is an output also. So it's out of the question to connect two outputs, you may want to use the HDMI output from the dvd player to be connected at a tv or screen with HDMI input.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Mar 12, 2011 | Toshiba Computers & Internet

1 Answer

Cd mix 2, right tray says no disc. After about 30 times of loading disc in it finally finds disc and works all night long. Next day problem is back. Why?


If this problem occurs only at this cd it's a disk problem. If it occurs on various disks try using a cd/dvd cleaner set, a wet one is better. Follow the instructions on the set. The main idea is to put one drip of the included liquid at the set (usually isopropyl alcohol) at a specific place (like small brush) on the disk surface and play this disk. This way the "brush" will clean up the laser lens and after that the cd/dvd player will be able to read the disks. BE CAREFULL not to put too much liquid on the "brush". In case this doesn't solve your problem, the cd player needs laser lens replacement by a technician.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 18, 2010 | Nu Mark Numark Cd-Mix-2 Dual CD...

2 Answers

I have lg DVD player and it says no disk when i insert the dvd it


MBB, First clean the CD/DVDs in plus manner. Up -down and right - left. And not in the usual circular as most of us try to clean them. Use a soft dry cloth.

Jun 04, 2010 | LG KU990 Viewty

2 Answers

How to record from tv . what sort of disc is used


if you unit is capable of recording from TV you use a R-W DVD Disk (Read write) The disk should be capable of writing many times. So can your unit erase as well as write?

Please rate my help++++Thanks for using FIXYA

Mar 21, 2010 | Televison & Video

1 Answer

I have a Philips DVP642 DVD player. It has worked


First try a soft reset... unplug for 20 minutes.
Otherwise - the laser is dirty or misaligned.
A Repair shop can clean and align for about $50.
It takes specialized equipment and templates to align the laser - not something you can do on your own.

Lens cleaner discs don't work.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.



Feb 27, 2010 | Philips DVP642 DVD Player

1 Answer

Cd in sony cd player in ford focus car. readout says "no CD" yet still plays


Hi,

Turn Off and On the player twice or thrice. Sometimes, it might work. Make sure you have the Genuine and compatible CD/DVD. Use some other Cd.If the problem remains the same, the issue is with player.

I have seen many times, this message occurs due to faulty player lens who sense the CD/DVD. Try to use a lens cleaner.If that would resolve the issue.Perfect unless you need to send the unit to repair or remove the player from the dash and repair it. It can be a circuit issue as the player is unable to sense the CD/DVD.

Let me know, if need further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Oct 09, 2009 | Car Audio & Video

1 Answer

Get some frezzing on some dvd with a few scratches which play on my old player fine


use DVD disc cleaner. This cleaner looks just like a disc with some extra little brushes on its surface. Some DVD cleaner kits even come with supplies to clean and modify scratches on your discs.

if this helps please leave a fixya rating as thats how we get paid

Apr 26, 2009 | Televison & Video

1 Answer

Need owners manual for Jensen VM9410


CLICK HERE


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 03, 2009 | Jensen VM9410 Car DVD Player

1 Answer

My dvd/cd-rom canot play or read


Your driver has become corrupted.
Go into device manager, and delete the drive.
Download the most recent driver from the manufacturers website to a location you can find on your PC.
Restart PC.
Let windows recognize the new hardware, and point it to the file you just downloaded when it askes for driver.

Thank you for using FixYa - A FiXyA rating is appreciated!!

Jan 22, 2009 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...