Question about Sanyo Microwave Ovens

Open Question

Sanyo super showerwave 900w power grill only runs for a few seconds then stops refer to handbook on screen. fault can be intermittent

Posted by on

4 Suggested Answers

MicrowaveSvc
  • 8820 Answers

SOURCE: Displayd LOC Code

The first step is to unplug it from the wall for a few minutes then try again.

In case it helps, model EM-S5595 is unlocked by holding the Stop/Clear button as in the photo below.

If that does not do it, try Sano/Fisher Service at http://sanyoservice.com/ .

You may also have a keypad or control board problem.

Posted on Oct 22, 2007

  • 1 Answer

SOURCE: REPLACING LIGHT BULB

i have a cookwork microwave the light stoped working

Posted on Apr 11, 2009

  • 8909 Answers

SOURCE: my sanyo showerwave 900w diegram

Dead appliance, power on wall outlet.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

If your appliance has absolutely no functions at all, remove it from the mains supply, remove the case and see where the mains lead goes in to the appliance and follow the cable until you find the main fuse.
ONLY USE THE SAME TYPE AND RATING OF FUSE TO REPLACE IT.
The usual cause of this fuse failure is the door switches are contaminated or sticking. Check the door switches before putting power back on to the appliance.
Hope this helps.

Posted on Jan 18, 2011

shane_barnha
  • 136 Answers

SOURCE: Can you tell me where

Because I do not know the exact Model number of your Microwave Go Here and enter your model number to get the Owners Manual.

Thumbs Up if Helpful!!!

Posted on Jun 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can my microwave oven be repaired? I have a Sanyo showerwave 900W the oven & grill works but the microwave stopped working.


microwave is not that good for your health anyway, you can repair it - unfortunately i do not think that this is cost effective, it will be cheaper buy second hand working model for $10 to $20 on gumtree, craighslist or even boot sale than repair that one.

hope this will help you - do not forget to vote...

Feb 23, 2015 | Sanyo Microwave Ovens

1 Answer

Sanyo EM-SL20 Super Showerwave 900W Powergrill has stopped heating


see the informaton with carefully and use the common sense:
God bless you
When the microwave sounds okay, but there's no heat, one of the internal door switches, the high voltage circuitry, or the circuit board may have a problem.
9_10_2012_12_23_50_pm.gif9_10_2012_12_24_07_pm.jpg9_10_2012_12_24_36_pm.jpg

Sep 09, 2012 | Microwave Ovens

1 Answer

I need a user manual for a Sanyo super showerwave 800w microwave. Model no. EM-G204 There aren't any on manuals online. Thanks Luke.


You can just type "EM-" (without quotes) in the search box at the Sanyo (Panasonic) support site here.

Check a few of the first results to see if they're close enough to help you.

If not, contact them via that page for more help.

Aug 22, 2012 | Microwave Ovens

1 Answer

Can you tell me where I can find a manual to sanyo fan assisted owen 1200 w, super showerwave 900W?


Because I do not know the exact Model number of your Microwave Go Here and enter your model number to get the Owners Manual.

Thumbs Up if Helpful!!!

Jun 20, 2011 | Microwave Ovens

1 Answer

How do i unlock the control key pad on a sanyo super showerwave


Try holding down the Stop button for approximately 5-10 seconds. This is the industry standard for locking and unlocking microwaves, although your Sanyo may vary. Please let me know if this helps!

Mar 01, 2011 | Sanyo EM-A5200SW Microwave Oven

1 Answer

My sanyo showerwave 900w diegram emd9550seuk no power in the display


Dead appliance, power on wall outlet.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

If your appliance has absolutely no functions at all, remove it from the mains supply, remove the case and see where the mains lead goes in to the appliance and follow the cable until you find the main fuse.
ONLY USE THE SAME TYPE AND RATING OF FUSE TO REPLACE IT.
The usual cause of this fuse failure is the door switches are contaminated or sticking. Check the door switches before putting power back on to the appliance.
Hope this helps.

Jan 18, 2011 | Microwave Ovens

1 Answer

REPLACING LIGHT BULB


i have a cookwork microwave the light stoped working

Sep 16, 2008 | Microwave Ovens

1 Answer

Displayd LOC Code


The first step is to unplug it from the wall for a few minutes then try again.

In case it helps, model EM-S5595 is unlocked by holding the Stop/Clear button as in the photo below.

If that does not do it, try Sano/Fisher Service at http://sanyoservice.com/ .

You may also have a keypad or control board problem.

Oct 06, 2007 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

1,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Sanyo Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...