Question about Samsung DLP HL-P5663W 56" TV

1 Answer

HL-P5663W I replaced my color wheel and now have a problem. When I go to the color setup in the consumer mode the red and blue are reversed and the color is way off when I'm watching the tv. any suggestions? Jerry

Posted by on

1 Answer

Well after reading a lot more on the internet I figured out that there is a jumper that has to be removed when you update to the new style color wheel. Also when you get the new wheel there is a new set of color setting that needs to be programed into the tv itself. NOW the picture is AWESOME! better than when it was new.
Jerry

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my Samsung hln567wx color weheel about a year ago due to the tv making an odd sound. Changing the color wheel did fix the sound but after a year has past the picture is replacing all red with...


Tv have colors flashes back and forth some time u get a normal pictures again?Yes,u must take the tv aparts than check the colors wheel again.Check it out it condition only don't touch the colors wheel itself.U have compression air machine blow some light compression air into tv colors wheel it self might have acumalate dust on the wheel,don't solved the problems.Might have to change the colors wheel again.

Aug 27, 2011 | Samsung DLP HL-P5663W 56" TV

Tip

Repair job update


Update
A number of people have commented that after changing the color wheel, their red and blue colors are reversed. This is a different color wheel and a newer model set than is documented here, but, some report that by removing a jumper on the color wheel, the problem is resolved. The jumper is as shown in this picture, below the yellow/white label.

color-wheel-jumper.jpg

on Mar 30, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

My Samsung DLP 5663W was making the loud humming noise. Picture was just fine, but the noise was loud. I checked both fans which seemed to be fine, so I ordered the replacement color wheel. When I replaced...


On the metal box where the two cables from the color wheel plugged look for a tiny rectangular opening in the metal shield---there is a tiny jumper plug there, remove it carefully with a tiny pair of needle nose pliers.

One of the things they do not tell you when you replace the color wheel, it is somewhat different than the original one.

SD TECH

May 06, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

Just replaced color wheel. Colors are messed up,


Check all the connections again.U miss some connections or wrong connections.

Jul 15, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

How do I replace the color wheel in a Samsung?


The following link will give you a step by step on how to do so. I did so and it worked perfect http://www.jangro.com/electronics/samsung-dlp-replace-color-wheel/. If once you install the new color wheel the colors on your screen are reversed all that has to be done is pull out the TINY rubber looking thing with 2 pins in it under the yellow/white sticker, not 1 inch or 3/4 inch under the sticker. Right below the sticker where that rectangular opening is.

Mar 21, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

I have a 42" Samsung DLP that makes noise that sounds like it's coming from the fan. The sound starts after the TV has been on for 20-30 minutes; it's a winding type sound and continues until after the TV...


These models usually suffer from a bad color wheel. You will know that the color wheel is at fault if the sounds goes away right when the lamp shuts off. Look at the back of the set and watch for the lamp to shut down. The color wheel is not a consumer replaceable item.

Aug 15, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

What does the color wheel "plug in" to?


the white clip that the 2 white/1 blue wire plugs into breaks when you remove the the wire. This should not be a problem as the wire should still fit snug when you plug back in.

May 12, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung color wheel jumper


possible cable is not making full contact with connector to or from color wheel assy.

Jul 15, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Color problem


Samsung color wheel fix
http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel/

Jan 13, 2008 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung DLP HL-P5663W 56" TV Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68386 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...