Labtec 1070 speaker wire is shot

Hello,
The problem has something to do with the sound driver. I suggest that you update the sound card driver in your computer. You can use RadarSync to scan and update the driver/s in your computer. This software will cover all driver-related problems.

David

Try swapping the left and right speaker wires. If the left speaker now starts working, then your amplifier is the problem.

rfgr

In case you have a drivers' problem you need the drivers for your soundcard (Dell motherboard). So please clarify me your Dell model.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Hi , whats the problem bud?..
1st: make sure it is plugged into a wall socket correctly , to gain sufficient amount of power.
Then correctly , plug the green color coded wire , into the Green input jack on your PC at the back , into the motherboard unless you have a sound card...
It should work perfect then :)
Happy new year :)

The shielded wires are for ground, so they get connected together. Plug the wire into the PC and run some music. Then touch each wire to the others. You only have a couple of combinations to try...red-to-green and white-to-yellow, or red-to-yellow and white-to-green, . You can do this while the PC is one and music playing until you get sound thru the speakers. There virtually no current running thru the wires and you can't hurt the PC by doing this.
If the speakers use an external power supply, have it plugged in and working when trying these connection options.

if its a 6 channel connection its a little tricky try reconnecting your speakers that has a green connections. try playing a music while troubleshooting the connection...hope this helps..ITTech7574

I recommend you to check the speaker settings.
Follow the steps in the below link to check settings:
http://labtec.custhelp.com/cgi-bin/labtec.cfg/php/enduser/std_adp.php?p_faqid=1917&p_created=1103844922&p_sid=xqSlLoBj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0xMDQsMTA0JnBfcHJvZHM9JnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MQ**&p_li=&p_topview=1

1 wire goes between the 2 speakers
1 wire goes from the speaker with 2 jacks in it to the computer, the back of the computer should have a green port to plug in the cable to
1 wire is the power

this is a guess without seeing your setup

1. first findout the problem is due to speaker or from your computer soun driver or hardware.
2. for checking speaker, connect to an ipod or walkman to the speaker input if it works the speaker is okay
3. check the computer sound driver software may installed properly
4. for these type dxdiag on run in the start menu
5. check the sound driver problem, if it re install the sound driver by using its cd