Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

I have a Kenmore 110.27032600 Elite washer. It stops at the final rinse and spin cycle and gives a code of oL. Is this a board replacement issue? They had a recall about a year ago but wouldn't leave me the old board (just in case something like this happened). Also we just moved into a new house and worried it got banged around. Any advice?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer comes out of wash cycle stops code ol.run in rinse/ drain cycle,ol stops before comple cycle ,run in drain spin compels cycle


I hate to say it but everything on those machines is controlled by one board which can become faulty at any time. I would replace the control board

Sep 06, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...

4 Answers

F51 error


Hello, the F51 code is a motor rotor position sensor failure. It's best to call in the warranty service as there is a bunch of tests that need to be run to determine if it's the sensor or control board. If the tech wasn't any help, contact the store for a replacement.

Thanks

May 20, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Stop frequently on spin and rinse cycle F6 code


I have a Kenmore Elite he4t front load washer that was working fine and then we moved and now it stops washing midstream and flashes an F and a H. I have to pause and restart then it will stop washing again after a few minutes and flash the same codes again. I reset again and then it stops with 1 minute left and will not drain.

Apr 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

There is an OL error code on my Kenmore Elite Oasis HE washing machine. It seems as if the washer isn't going through its final spin cycle or something. My clothes are very wet and I've been having to...


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 29, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Washer is skiping rinse and don't spin has code ol


be sure that both water sources are connected and turned on.

Sep 14, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Final spin /rinse cycle won"t stop


It's usually a control board problem. sorry for the bad news :(

Jul 07, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Kenmore Elite Oasis HE/ Error Code F1


f-1 error code,, replace main contol board ,,pressure swtich is loacted inside board would not fill drain and spin once replaced there will be no more problems, if machine is 2 yrs should be covered under warranty

Nov 24, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2183 Answers

fordexpert

Level 3 Expert

5522 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...