Question about Veo Stingray

1 Answer

Web cam its plug in the computer but i dont see it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 268 Answers

Hi,

This is the best way to download the drivers of all your devices which are connected to the system for free.

But you have to be patient.

First, i want you to download a ree program called "Orbit download manager" from the link below,

http://dl.orbitdownloader.com/dl/OrbitDownloaderSetup.exe

And then you can download a program called "Driver genius" from link

http://www.qwerks.com/download/6776/drvgenpro.exe

it is a trial program for 15 days

dont worry we only need it for 5 minutes

Install & run the program & in the windows click on the update the drivers

It ill check & it will give the window with the rives that ns to be updated & it will not update a it is a trial one.

So you just right click on the driver name, you will get a message called 'copy url address 1' copy that & open the orbit downloader & click on the create new download & paste the link the drivers will be downloaded for free.

Some sits give these drivers only for the money & we cannot be able to find them from the free sites, so i think this would be a nice trick.

Good Luck.

Live, Love, Laugh.

Posted on May 15, 2008

  • Lucky
    Lucky May 15, 2008

    Hi,

    Sorry i have mistakenly posted in your question.

    Have you installed the software for the camera.

    If not do what i have mentioned above to get the free drivers.

    Or

    If you installed the drivers, check in the device manager whether it is mentioned or not.

    If something has angs like ?, !, or X mark.

    The drivers for them needs to be installed.

    Install them.

    Turn the camera off & wait for 5 min & then turn on.

    Turn off the system wait for some time and turn it on.

    Now connct the camera if you already installed the driver or software.

    First before connecting the webcamera install the software or thr driver ti will prompt you to connect the camera then connect before that dont do that.

    Good Luck.

    Live, Love, Laugh.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway webcam


Dear Tori,
Greetings from New Zealand! You have not supplied much info - so we'll start from the beginning...SAFELY Remove web-cam connection - (I presume it is a USB connection?) - by R-clicking on the little icon - usally green - in the systray by the clock, & following instructions. Have you installed the web-cam "driver" software from the cd that came with the web-cam? If not then do so. Plug in web-cam USB & wait until pop-ups notify you that web-cam device is detected & ready to use. L-Click on "START" > All Programs > Web-cam program.
If this option does not work/is not available, then OPEN "My Computer" & click on web-cam icon. This should start web-cam software & you SHOULD see your smiling face on screen!
If Nothing works - then you will have to make a note of the model & contact Gateway for support.
I hope that this helps! GBU! - Bruce.

Apr 28, 2013 | Gateway Computers & Internet

1 Answer

I have a vebcamera but i dont know how to install bacause i have not a instalation disc


I researched your question and you can download the drivers you need to make your web cam operate. This is the Trust official site so you are getting the correct drivers you need. Below is the link you will need to take you there.Either click on the link or copy and paste it in to your web browser then download the drivers you need for the operating system you have here is the link.

http://www.trust.com/products/productdrivers.aspx?artnr=15355

I would suggest you unplug the web cam from your computer first, then down load the drivers and install them then if your prompted too plug your web cam back in again. If your not prompted to plug in your web cam wait until the drivers install. Then plug your web cam in a message will pop up saying a new device or drivers are being installed. Once this completes reboot (restart) your computer and you should now be able to use your web cam again.

I hope this helps you out, if it does please leave a YES that I did help you out. Thank you.

Apr 06, 2011 | Trust Webcam Live WB-6250X

1 Answer

Hello well, my webcam may be a older version,i just ordered it. it's a megapixel i can plug in the usb part but it's not coming on,it's not doing anything.do i have the right webcam?


I dont know the make and model of your webcam is but here is something you may want to try to get it to work. First look at it closely for a tag giving you the make and model, then go to the manufactures web site. Unplug your webcam from your computer first and download the latest drivers for it. They usually are free and supported by the company that made your web cam. Once you have your drivers installed plug in the web cam back in to your computer. A window should pop up saying that its installing a new device or drivers. Once this is completed it may want you to set up you web cam probably voice and image. After that you should be able to use your web cam when ever you want too.

I hope this helps you out.

Apr 01, 2011 | Computers & Internet

1 Answer

Rerstoring web cam


just attach it to the usb port in the pc and it will detect and said to provide him the cam driver and giver him the driver and it is install and ready for use. some web cam are plug and play the dont need and driver just attach it to the usb port and after few second the are ready to use.if the pc is not detecting the cam on the port it mean cam is damage.

Sep 29, 2009 | Computers & Internet

4 Answers

I have havit web cam but there no driver for it in


i have a havit web cam but dont have ahavit web cam driver.
i want havit web cam driver

Jul 09, 2009 | Computers & Internet

2 Answers

Plzzzz help me =[


Firstly Logitech cams are plug and play, what happens when you plug it into the USB port?

Oct 18, 2008 | Logitech QuickCam Messenger Web Camera

3 Answers

I need to install my web cam


You need the driver for it.

Try this one
http://www.bioticaindia.com/wc-701m.html

Let me know if it doesn't solve the problem and il look for another one.

Thanks,
Ekse

Aug 01, 2008 | Computers & Internet

3 Answers

Generic Digital Web Camera Driver


I have a generic digital web cam but I dont have the appropriate driverI have a generic digital web cam but I dont have the appropriate driver

Apr 14, 2008 | Computers & Internet

1 Answer

Web cam


You can go to http://www.jascoproducts.com/support/software-downloads.asp to find the driver for this webcam. Make sure you have uninstalled and unplugged the webcam prior to installing the driver. Once the driver is installed, plug in the webcam and reboot your computer. Good luck!

Sep 06, 2007 | GE EasyCam Webcam

Not finding what you are looking for?
Veo Stingray Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Veo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...