Question about Grilling
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go to jenn airs web site an order a new natural gas regulator and or-faces.
Good luck and please rate fixya!
Posted on Feb 24, 2009
The only thing you can do if Weber doesn't have a natural gas manifold for their grills , is to buy one that will fit. They use propane on outside grills because of the stability of the gas. Natural gas will blow out much easier.
Posted on Feb 25, 2009
Typically, the only thing required is changing any and all jets since energy content and pressure are different. The only source for these is probably the manufacturer; check their website.
Posted on May 20, 2009
On the weber model you need to purchase the natural gas model. It will cost you alot more to buy all parts needed to convert. Weber doesnt want you to convert do to safety reasons. This is why they will only tell you you can't convert. Buy the right grill and save yourself a headache.
Posted on Jan 20, 2010
You will need to replace the orifices and install a propane regulator and hose. Plus, of course, you'll need to buy a 20# cylinder. I looked up your grill serial # and found a parts explosion for your grill. Here is the link: http://www.weber.com/PublicSchematic/view.aspx?model=6821001
If you click on the "additional parts" link, they have the conversion kits listed, but none of them are available anymore. As a propane guy, your best bet is to take it to a local propane co and have them convert it to propane for you. They will drill out your existing orifices and install spuds, and then re-drill smaller holes for the appropriate BTU rating for each burner. Then they can install the regulator and hose and even sell you a new and full 20# cylinder. Call around first and see which one can help you, as not all have serviceman that can do this particular job. Hope this helps. Douglas
Posted on Jun 07, 2010
Tips for a great answer:
May 06, 2015 | Water Water Heaters
Oct 05, 2014 | DeLonghi Heating & Cooling
Oct 06, 2013 | Maytag Neptune MCG8000AW Gas Dryer
Aug 06, 2011 | Kenmore Elite 644 sq. in. Cooking Area Gas...
Mar 10, 2011 | Heating & Cooling
Jan 19, 2010 | Weber S-420 (NG)
Feb 25, 2009 | Weber Genesis Silver B Grill
Jan 06, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Aug 15, 2017 | Grilling
57 people viewed this question
Usually answered in minutes!