I am looking for a video driver to a Hyundai P224W monitor

check for a loose vga port, if no loose connection at this time you are going to remove the cover of the monitor.check for a loose connection( ribbon wire) on the lcd controller going to the lcd panel.

You don't really update the drivers for your monitor. If you want to update your video drivers. I'm guessing because it's a Compaq Presario PC that it uses Integrated Radeon graphics acceleration so to update those drivers go here. Once there you will need to select Integrated Motherboard Graphics in the first block. From there on I will need to know the exact model number of the Compaq PC to proceed.

Hi
If the screen is connected to a computer usually its a video card/ video cable problem and not the LCD monitor. Try to check the video cable look for loose connection or bent pins, if none try using a different video cable or checked the video card component of the computer too see if its still working,. Your monitor is dependent to your video card signal inside the computer. Without the signal monitor will not work.
thanks for using Fixya

check settings on the mini make sure set up correct ,,sending correct signal,,also chack for driver updates and downloads for monitor and the hp mini,,check hp.com support they can help to

josealvajr, Check YOUTUBE again!! Use search terms: "lcd monitor repair" and "lcd monitor disassembly" and you will find some video clips that may not be for your unit, but will help you. All ccfl back-lit lcd monitors use same basic electronic design to display text and images on the lcd panel!!! Hyundai probably won't sell you a inverter/smps board. Look for swollen capacitors on the power supply board. Lots of pic's on web for you to look at. 12fixlouie

Go the the manufacturer's website and download an updated driver for your particular monitor.
You'll find it here

http://driverscollection.com/?H=L91A&By=Hyundai

Hello,

yes, The pivot function is controlled by a software application that came with the monitor on the driver disk. A few video cards directly supports the tilt function without the driver but most need it to function. You should be able to download it from the Hyundai monitor web site if you don't have the original cd.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
[email protected]

Try connecting the LCD monitor to a notebook computer.
Set the notebook's video to 800-by-600 and 60 Hz,
to see if the LCD monitor will accept these settings.
Set the notebook's video to 1024-by-768 and 60 Hz,
to see if the LCD monitor will accept these settings.
Set the notebook's video to 1280-by-1024 and 60 Hz,
to see if the LCD monitor will accept these settings.

Restart your desktop computer in "Safe Mode",
after reconnecting the LCD monitor, and use the settings that work
when the LCD was connected to the notebook.

CHECK CABLE CONNECTION TO PC...TIGHTEN IF NECESSARY...IF THAT DONT WORK TRY A SEC MONITOR IF CLEAR U HAVE A BAD MONITOR...IF BAD PIC..THEN U HAVE A BAD VIDEO CARD ON PC

http://driverscollection.com/?file_cid=24622933713hBuWizS5I1EwOBkI