Question about Kingston Technologies 512MB DataTraveler I (DTI512KR) Hard Drive

1 Answer

Flash drive problem

Though the flash drive is recognised and can be removed safely, data therein cannot be accessed. A message 'please insert a disk into drive F' is appearing.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

May e data is corrupt. use some data recovery software for data retrival

Posted on Jul 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IT CANNOT STORE DATA,I WAS ABLE TO USE KINSTON USB 1G ONLY ONCE AND ALL THE DATA STORED THEREIN WERE LOST THE NEXT TIME I OPENED IT


Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm

www.CardRecovery.com

Aug 12, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

4 Answers

HOE TO FORMAT DATE TRAVELER


The simplest way to format a Flash Drive or a Pendrive is to format it from the My Computer without using any commands. Let's assume you are doing it on a Computer (Pc Desktop). Follow the instructions;
1. Connect you Data Traveler on one of the Usb port of your computer, and wait for few minutes.
2. After you know that it's been detected by the computer, open "My Computer" then right-click on the Data Traveler's Drive Icon e.g. Removable Disk (K:), etc.. and select "Format"

Removable Drive 0ba4f68.jpg



Right-Click on the Removable Driveb1ae6d5.jpg
3. When the format dialog box is opened, click "Start" and then you'll be prompted with a warning message to confirm the proceed, click "Ok" to proceed. Formatting Dialog box bf3d566.jpg


Format Warning Message
d26cc6a.jpg



4. Wait for few seconds and you'll get another message that the drive has been successfully formatted.

If you have problem, please let me know. Good luck.


Thanks for using FixYa.

Jul 09, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

I am not recognising kigston data traveller


When the flash memory USB hard drive device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.
NOTE Formating the USB flash drive will delete your data.

May 11, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

5 Answers

Pen drive is not working


1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW.EXE

2. Format

(Before removing USB flash drive click on the Safely Remove Hardware icon and then click on USB flash drive you want to remove)

Dec 14, 2009 | Kingston Technologies 512MB DataTraveler I...

1 Answer

My sandisk icon does not come up when I insert the disk. I have a program on the disk in U# that I cannot get to. what do I do? I shut my computer down without removing the flash drive.


Try inserting the Scandisk in another computer to see if you can retrieve your files. If you can then backup your data.

Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you may need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm

www.CardRecovery.com

Nov 28, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

No access to USB drive when inserted (Windows). ''Malfunction'' error message.


Sometimes when a flash memory stick fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs).
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

Oct 30, 2009 | SanDisk 1GB Cruzer Titanium USB Flash...

2 Answers

Usb is not responding when inserted into laptop (have tried another computer so fault must be in the flash drive)


Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you may need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive this program may help: -
Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm


When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32.
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

Oct 06, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Verbatim 4gb flash cant be recognised


1. Download this tool:
http://dl.dropbox.com/u/4040651/LLFTOOL.EXE

2. Format

(WARNING: After running this low level format tool,
the whole USB flash disk surface will be fully erased.
Therefore, data restoration will be impossible after using this utility!)

Jun 02, 2009 | Verbatim CORPORATION 94933 USB 2.1GB...

1 Answer

Insert a new disk


Try connecting it on a different system, if it is not getting recognised you will need to format the drive.

Jan 27, 2009 | Lexar 64MB FLASH MEMORY DRIVE USB 2.0 -...

2 Answers

USB flash disk not working


Assuming you are using a Cruzer Micro Drive with U3 Smart, things can be a little confusing because the drive actually shows up as two independent devices. When you insert the drive, there should be two devices showing up in your list of drives. One of them is installed as a CD Rom Drive and the other one is a Removable Drive. If you double click on the CD Rom Drive instead of the Removable Drive and you don't have any U3 applications mapped to the CD Rom Drive, then you'll get an insert disk message because Windows thinks that the CD Rom Drive is empty. Just use the Removable Drive if you want to simply install and transfer files.

Jan 05, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

Not finding what you are looking for?
Hard Drives Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kingston Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Florin

Level 3 Expert

733 Answers

Are you a Kingston Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...