Question about Minolta DiALTA DI2510F All-In-One Laser Printer

2 Answers

PLEASE HELP ME WITH CODE 0910 - Minolta DiALTA DI2510F All-In-One Laser Printer

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,110 Answers

C0910 service code means that your tray 2 is not lifting the paper properly. Most often this is caused by the tray being loaded improperly. So to try and fix this I would open tray 2 and check the loading of the paper and correct if necessary. Reset the code by turning off then on the main power from the back left side of the machine. Leave tray 2 open until the copier warms up and says ready. Then close tray 2 and wait to see if the code comes back. If it does then you have a motor lift problem or the sensor that detects the lift is bad. You can always leave tray 2 open and inch or 2 so that you can still use the copier as this will keep the code from coming on.
Good Luck and Thank You for using Fixya.

Posted on Sep 13, 2010

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

When I turn on the photocopier DiALTA Di2510 provides the codex C0500

Posted on Jun 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix trouble code 0910


Unrecoverable error (The count is made by C-5402.)
An abnormal operation accurs when an interupt copy is made (copy print job 1). Estmated defective par Overall control board (OACB).

Oct 15, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

I have a vision quest tv and lost the remote and the buttons on the side won't switch so I need a code for my universal remote


Check these codes. If you wish to get more codes, check this site.
0664 0691 1233 0529 0404 1939 0067 0586 0039 0246 248 0247 0481 1167 1938 0910 1248 0906 0895 0728 744 0736


Feb 10, 2013 | Televison & Video

2 Answers

Hotpoint TDC32 dryer door safety switch


look inside frame by door take out switch and replace it

Apr 08, 2012 | Hotpoint TDC32 Electric Dryer

1 Answer

No graphic driver I-0910


You can find drivers for onboard graphics cards on your manufacturer's website.

Jan 01, 2012 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

Error c-0910


C-0910
The Lift-up Sensor is not blocked even after the lapse
of a given period of time after the lifting motion has
been started.

Basically your paper tray 2 did not lift right. Open the tray and make sure the paper is loaded correctly. The paper should be touched on all four sides by the tray or by adjustable guides. Open and close the front door with the tray out. Once the machine is ready to copy close the drawer you should hear a slight buzzing sound as the tray rises. If you don't or you hear a banging or grinding sound the tray lift motor may be damaged and you will need to call a service technician.
If the code keeps coming back pull out tray 2, open and close the front door to reset and leave the tray 2 partially pulled out until a technician can repair.

May 03, 2010 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

I need a code for a pyle tv


The best I can find for the Pyle TV is 0910. Not exactly a common model to track down.

Jan 24, 2010 | General Electric Universal Remote Control

1 Answer

Regarding authorization code


6028 0377 9931 0462 7366 4895

Jan 31, 2009 | Adobe Photoshop CS3 10

1 Answer

Dmtech remote control programming codes


I have been looking for the same codes myself and all I have found is: 0157 0159 0335 1994 2024 2031 0067 0312 0910 0208 0586
hope one of these work for you.

Dec 29, 2007 | Televison & Video

Not finding what you are looking for?
Minolta DiALTA DI2510F All-In-One Laser Printer Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...