Question about Canon PIXMA iP90 Mobile Printer
Press the right button, hold it for two blinks
Posted on Oct 05, 2010
Syncronise it with pc in pc you can give the sample page command
Posted on Sep 13, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Canon iP90 Printer Problem
I have 2 MP 390s. On one the print head is stuck on right and does not move. On the second the black ink does not print but everything else seems to be fine. How can I remove the print head from the stuck machine and place it on the other one?
Posted on Feb 12, 2008
Have you performed a nozzle test? If one or more of the colors is missing when you do the nozzle test, the printhead itself is likely in need of replacement.
Before considering replacment, perform a clean on the printer. Due to variations between mac and pc, please see your documentation / support files on how to perform the clean on your printer.
After performing the clean, again perform the nozzle check to see if the problem is resolved.
If still not resolved, remove and re-install any cartridges you recently replaced to make certain they are installed correctly.
Posted on May 12, 2008
A few basic causes. Most of them generic but should be able to help you out
1. The cartridges you bought were not original equipment ones (OEM)and many "clone" cartridges are known to have problems with the ink level chips
Take them back and get them replaced with a different brand
2. They are original cartridges but may still be faulty (rare but possible)
Take them back and get them replaced
3. Your print head is clogged or faulty
Run your printer through the head cleaning process a few times and see if it clears up.
4 your cartridges are out of alignment
run the cartridge alignment process
%. The head maybe just plain old pooched (not always repairable but on occasion...)
If you are filling them yourself then...
Cartridge ink levels are usually monitored by a small chip on the cartridge. If that cartridge is allowed to fall below 25% ink level most chips then become locked and not able to re-set.
For many cartridges you can buy a reset device to reset chips that have not become locked. Or you could buy empty cartridges that don't need resetting and that will always accept a self refill.
As for scanning if by that you mean the photocopy function then that could be linked to any of the above. But should you mean it wont scan to the computer then you should look at any hardware or driver issues that you may have and maybe also the source selection (usually TWAIN) is a good source selection.
If this information was useful please click below
Posted on Aug 18, 2009
Tips for a great answer:
Feb 11, 2010 | Canon PIXMA iP90 Mobile Printer
Nov 06, 2009 | Canon PIXMA iP90 InkJet Printer
Jun 23, 2009 | Canon PIXMA iP90 Mobile Printer
Jan 30, 2009 | Canon PIXMA iP90 Mobile Printer
Dec 13, 2008 | Canon PIXMA iP90 InkJet Printer
May 01, 2008 | Canon PIXMA iP90 Mobile Printer
2,879 people viewed this question
Usually answered in minutes!