Question about Xerox DocuColor 3535 Copier
+24 VDC power is failed. Status Code 102-319 is displayed after 116-325 is displayed.
+24V LVPS is failed. Perform following:
Remove Rear Cover (REP 14.2).
Remove cover from +24V LVPS (PL 9.1).
Disconnect P502 on +24V LVPS (Figure 1).
Check that power is switched off. Measure resistance of fuse on +24V LVPS. Resistance is 1
ohm or less.
if no Replace +24V LVPS (PL 9.1).
if yes Switch on the power. Measure the AC voltage between the white and black wires in P2 on the
+24 VDC. 110 or 220 VAC is measured.
Posted on Oct 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 11, 2018 | Computers & Internet
on Dec 27, 2016 | Computers & Internet
Sep 11, 2017 | Garden
Apr 17, 2015 | HP Computers & Internet
Mar 02, 2011 | Office Equipment & Supplies
Jan 30, 2011 | 2006 Pontiac Montana
Dec 05, 2008 | Computers & Internet
This is Vikram Kumar Thumu. I have seen your message on the issue related to the Battery . I would like to give my suggestions on the issue. I hope that this should work and will resolve the issue for you.
Well, the issue seems to be related to both Battery and AC adapter. We need to isolate the issue to resolve the issue.
I recommend you to try the steps of below web link.
The above link is of HP recommended steps on issues related to Battery issues.
Well, please perform the steps as mentioned in the web page and let me know the result. If the issue still persists then I'll be glad to provide more web page solutions on the issue.
If you need any further assistance on the issue, you can mail me at email@example.com
Oct 22, 2007 | Compaq Presario R3240US Notebook
My name is Vikram Kumar Thumu, from India-Hyderabad. I have seen your message on the issue related with installation of your Printer PIXMA MP530 All-In-One InkJet Printer . I would like to provide my suggestions on the issue. I hope that this should work for you and will resolve the issue.
I have made a through research on your issue and found a suitable web link of Canon web site, that helps to your issue.
I recommend you to open the below link
Once if you open the link page, there you can see information related to software installation issues. Please select appropriate issue that you are experiencing with installation of software and go ahead and perform the steps as suggested by Canon Manufacturer for your Printer.
This should resolve the issue for you.
If you need any further assistance on the issue, you can mail me at firstname.lastname@example.org . I'll be glad to help you.
Oct 20, 2007 | Canon PIXMA MP530 All-In-One InkJet...
Jul 01, 2014 | Xerox DocuColor 3535 Copier
254 people viewed this question
Usually answered in minutes!