Question about OKI C5150n Led Printer

1 Answer

Poor print quality

The print quality on my OKI c5150n is getting faint. The black only printing on the right 1/3 of the page is getting lighter.

Any suggestions?

Posted by on

  • 2 more comments 
  • Anonymous Aug 07, 2008

    I replaced my black drum and it is still the same!

  • tumbletrav Jan 21, 2009

    There's a line along the left side about 1/4 inch. I tried distributing the black toner cartridge around, but that didn't help. I just replaced the drum, so that's not it.

  • Anonymous Feb 23, 2009

    I have the same problem. I changed my drum and id didn't help.

  • NTUCKER934 Mar 18, 2009

    OKI C5150 LED PRINTER

    PRINTING LIGHT ON BLACK ONLY.

    PUT A NEW DRUM IN AND A NEW TONER [ BLACK ] AND THE

    PROBLEM IS STILL THE SAME PRINTING LIGHT.

×

1 Answer

You need a new black drum.

Posted on Jul 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it when using black it only comes out grey on the far right side


remove toner and drum unit
remove toner
check to see if there is toner in the drum unit if not fill unit run 5-10 prints
replace dev roller
replace drum cylinder(opc)

Jul 14, 2014 | OKI C5150n Led Printer

1 Answer

How can I get the IP off of an OKI printer


print the staus page from the printer and it will be listed on that.

Mar 05, 2010 | OKI C5150n Led Printer

1 Answer

Oki C3100 - v poor print quality


Hi Errol

The way to identifiy your problem is to send a full colour print to your printer and open the top just as the paper starts to come out . if you then remove your toner / drums for all the colours you can see the transfer belt if the quality of the image that you can see on the transfer belt is good and clear your problem is with the transfer form the tranferbelt to the paper and not any toner /drum issue and the most likley cause is the transfer belt itself "but before you relpace it remove it and clean around the electrical contact points and generally make sure the internals of the printer is free of loose toner .

Regards Alan (Alstech)

May 13, 2009 | OKI C3100 Led Printer

1 Answer

Poor quality print


Try cleaning the LED heads. These are located in the lid and are facing you when you have raised the lid. A quick wipe with a dry cloth or tissue should help. If in doubt, check the user manual.

Apr 16, 2009 | OKI C3400n Laser Printer

1 Answer

Black fades left to right


change the toner

check paper path

check the fusser unit

Mar 22, 2008 | OKI C5150n Led Printer

1 Answer

Oki C5150N Grinding noise


One of the drum cartridges is stuck. Test by removing them one at a time with the printer off, then turning on.

Oct 31, 2007 | OKI C5150n Led Printer

1 Answer

Yellow Lines on every print


If the optics are clean (use lint free cloth on 4 rows of black thingys underside of lid)

 

Then it sounds like the yellow drum needs to be replaced, when printing in word I'm guessing that you have it set to B/W prints hence no colour is engaged, no lines

Oct 17, 2007 | OKI C5100n Laser Printer

2 Answers

Oki c5150 wont print black


First, clean the LED heads with a lint free cloth and isopropyl alcohol (the LED heads are the attachments on the underside of the lid when you open your printer; four of them for each color). Try printing something after doing that. If it's still an issue just with black, try switching the black and magenta drums/toner (keeping them locked together). The drum w/ toner cartridge simply pulls straight up and out, no switches or locks to flip. Then print a page of text; which will output from the printer in magenta. If that looks okay, then it may be an issue with your black drum and needs to be replaced.

Oct 05, 2007 | OKI C5150n Led Printer

1 Answer

Faint print or colour missing V V URGENT


I'm not an expert on these but I'd guess either the high voltage unit or LED laser PSU are suffering from an intermittent problem. If you're lucky it's just a loose connector - but I'll bet you've already tried re-seating every connector you can find :)

Sep 24, 2007 | OKI C5400 Laser Printer

Not finding what you are looking for?
OKI C5150n Led Printer Logo

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...