Question about Labtec Rocketfish Webcam

Open Question

Okay so, I have a Rocketfish webcam, model RF-NBCAM. My USB20 Camera port drive is not working. I've run driver checker and it identifies the driver just fine, but it attempts to load a driver for Windows Vista. I use XP. Anyone know where I can get the correct driver?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

yooperbud
  • 8637 Answers

SOURCE: Have several installed rocketfish webcam drivers in my Mac ibook.

Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud



Posted on Jun 23, 2009

  • 118 Answers

SOURCE: labtec webcam driver problem

if you have he caera picture you are downloading the wrong drivers.

here are the proper drivers--
http://labtec.com/index.cfm/service/listing/APAC/EN,crid=68,crid2=1764

Posted on Jul 17, 2009

yooperbud
  • 8637 Answers

SOURCE: is this webcam compatible with Skype?

See section A. Skype in the info below to setup the Audio & Video.

Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

After downloading and installing Skype set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

http://ca.messenger.yahoo.com/download/

After downloading and installing Yahoo Messenger set it up as follows:
1. Click on Messenger at the top left and then go down to Preferences and then the Preference Window will come up.
2. Next click on Calling and Devices. In the Calling & Devices on the right and set the Microphone and Speakers to the computer Audio Card or sound device installed in the computer.
3. Just below that, go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
4. Then after completing the Audio Setup, on left panel, go to down and click on Super Webcam and click on Start Super Webcam Mode Automatically.
5. Then click APPLY and then OK.
6. Next click on MESSENGER and then click on MY WEBCAM and you camera should BRODCSAST and you will see your picture.

C. Windows Live Messenger:

http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger

http://dashboard.aim.com/aim

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Oct 23, 2009

yooperbud
  • 8637 Answers

SOURCE: Skype dies while using a Rocketfish webcam

YOU NEED TO FOLLOW THESE INSTRUCTIONS AND NOT USE PROPERTIES.

See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Nov 18, 2009

  • 2658 Answers

SOURCE: Trying to install Labtec drivers for my labtec

You can contact Labtech from here
http://www.labtec.com/index.cfm/service/splash/AMR/EN,CRID=3

You may have to run it in Compatibility mode if Windows 7 webcam software is not available - I'm sure they can advise you

To navigate to CM on my logitech I rightclick the webcam shortcut icon on the desktop and click 'Properties' and then the 'Compatibility' tab.

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Download for a driver for rocketfish rf30HUB4


Test it on other computers and if they recognize it try to download driver updates to your computer which help to recognize external devices.

Jun 03, 2013 | Rocketfish Superspeed 4 Port Usb 3.0 Hub...

1 Answer

I cant install my webcam because i don't have the disk it's a rocketfish product model number RF-NBWEB


Go to the internet and Visit google and type the "download drivers for"name and model of your camera). You will be presented with a number of links where you can download your drivers from.

Dec 22, 2011 | Labtec Rocketfish Webcam

1 Answer

M rocketfish cam will work just fine for a couple of minutes and then it zooms in on the corner and puts a bunch of lines through the picture. How do I stop this?


The driver for your camera is corrupt but windows still recognizes it as the best driver for your device so it will not replace it. You need to uninstall the camera driver manually. Depending on your version of windows: 1: Click on your start button- move the cursor above the "My Computer or Computer" link on the right side and RIGHT Click and choose "Show on Desktop" 2: Now- Go to the icon of My Computer on your desktop and right click and choose "Properties". 3: Go to the "HARDWARE" tab and click, then Choose "Device Manager" button and you should get the listed INSTALLED current drivers on your system. 4: If your camera is not showing immediately, go down the list until you find it under "Imaging Devices" or "USB Composite Devices". 5: Once you find it, click on it and choose "Uninstall" - Confirm the uninstallation and is asked, choose to have windows delete the driver files for this device. - NOW YOUR FREE TO REINSTALL THE NEW driver and it should work fine. Locate your driver and manual here: http://www.rocketfishproducts.com/product-search.html?query=rf-hd
Hope this helps... -Rob

Nov 21, 2011 | Labtec Rocketfish Webcam

2 Answers

Webcam Rocketfish, need cd,lost


Please find the official support site for downloading the drivers, download and install, run and then connect the webcam. Uninstall all previous webcam installations.
click on:
http://www.rocketfishproducts.com/support.html?tab=product

Sep 30, 2011 | Labtec Rocketfish Webcam

1 Answer

I have a rocketfish webcam and I need free driver download for it, hear is the model # RF-NBWEB please help me. I like this camera. Thank you for your time


Look here: http://www.rocketfishproducts.com/product-search.html?query=hd+webcam&mode=support&supportSearchButton=Search

Apr 11, 2011 | Labtec Rocketfish Webcam

1 Answer

RfLVCentral2.exe has encountrered a problem and has to close. This is the error I get every time I open my webcam that I just installed. It opens and about 3 seconds later the error message comes up and...


You need to provide some more info about the computer.
Which operating system are you using?
Is it a new camera?
Does this camera work with any other computer?
Have you tried downloading the drivers from the manufacturer website? If not then try that as well depending upon the operating system you have. If you want then we can take the remote access of your computer and try fixing the issue for you. Reach us at HNetworking.com and chat with us online over there.

Feb 13, 2011 | Labtec Rocketfish Webcam

3 Answers

How do I install rocketfish camera RF NBWEB without a disk?


Windows drivers are at
http://www.rocketfishproducts.com/skins/skin_1/Topics/Drivers/RF-Webcam.zip
Mac drivers are at
http://www.rocketfishproducts.com/skins/skin_1/Topics/Drivers/RF-NBCAM-Mac.zip

Good luck!

Feb 08, 2010 | Labtec Rocketfish Webcam

1 Answer

How do I install the rocketfish camera on a mac? My computer can not read or open the files on the installation CD. Any suggestion?


http://www.rocketfishproducts.com/pc-35-3-rocketfish-notebook-web-camera.aspx

download the installation from here. it should work if the computer answers these requirements:

G3, G4, G5 or Intel Core Duo based Mac.
USB 1.1 or higher port
MAX OSX 10.2.0 or higher
QuickTime version 6.5.1 or higher

Sep 24, 2009 | Logitech QuickCam Connect Webcam

1 Answer

Installation issue


Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Apr 21, 2008 | Microsoft LifeCam VX-6000 (68C-00001)...

Not finding what you are looking for?
Labtec Rocketfish Webcam Logo

Related Topics:

1,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Labtec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...