Question about Fuji FinePix A330 Digital Camera

1 Answer

Zoom error The main problem with my camera is that whem turn on, the lens will not come out to zoom the focus; and in the LCD it indicates zoom error.

Posted by on

  • axwang11 Jun 21, 2008

    The camera does zoom out to take pictures. The LCD screem indicates zoom error. I try to reset camerera again but fail to solve problem. I removed batteries for a period of time and put them back but the problem remain.

  • Anonymous Jun 30, 2008

    zoom froze open lcd states zoom error

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a message coming up saying "zoom error"


If the camera was operating properly before the zoom error then the most common problem to a stuck lens is dirt getting stuck between the two lens barrels. There are a few fixes for this none are guaranteed to solve the problem and should not be attempted if the camera is under any type of warranty. They include removing the batteries for a few minutes, reinstalling the batteries with fresh once with full power, turn the camera on while holding the the zoom button. Another method is to see if you can provide extra power to the focus motor by having the LCD screen turned off. There my be a button that allows you to switch from the viewfinder to the LCD screen switch to the viewfinder and try several times to focus (just point the camera at different distant objects) and attempt to focus the camera. I hope this gives you the results you need because the other suggestions may further damage the camera and are only a (last resort) thing. One is with the camera turned on tap the body on a counter or table edge while trying to zoom the lens obviously in the opposite direction to where it's stuck. The last is to gently push the lens in with the palm of you hand while zooming in. All these are just suggestions and carry no guarantee of working and may further damage the camera. The biggest cause of this problem is dust from a camera bag or some other environmental condition like sand from a beach.

Jan 24, 2011 | Fuji FinePix S1000FD Digital Camera

1 Answer

When i turn on the camera, it gives me an error message: the lens cover might be closed - E61:11


The abnormalities in initialization of the focus lens and the abnormalities in initialization of the zoom lens occurred simultaneously (FOCUS OR ZOOM SECTION NOT WORKING PROPERLY)

Mar 29, 2010 | Sony Handycam DCR-DVD108 DVD Camcorder

1 Answer

Fujifilm finepix a820 zoom error ... i turn the camera on and it wont focus... message on lcd screen is zoom error. it will not take picture and when i turn it off agan the zoom bit wont go back inside


Hi,
    This problem is related to the malfunctioning of zoom motor, Two possibilities are there,
1- If company provides technical help on component leve in your regionl then zoom motor may replace.
2- If component level support is not available then LENS ASSEMBLY must be replaced.
   Contact your nearest fuji service centre or contact any expert nearby for the specific part replacement.
    Thanks for using fixya.

Oct 28, 2009 | Fuji FinePix A820 Digital Camera

1 Answer

Camara not focusing/ zoom not working


Its an error code and shows problem of Lens mechanism.
Lens focus / zoom motor is stuck that's why camera gives out of focus image.
You need to replace Lens Assembly and it would cost you more then camera worth.

Oct 26, 2008 | Sony Cyber-Shot DSC-T1 Digital Camera

1 Answer

Re- fuji finepix s5000 digital camera


when the camera is turned on the screen says zoom error and whem pressing the zoom button the camera makes a noise and the lens does not move

Oct 12, 2008 | Fuji FinePix S5000 Digital Camera

1 Answer

Zoom won't go in or out canon power shot sd870


zoom will not work in movei mode.
operate zoom before shooting in movei mode.

Apr 09, 2008 | Cameras

1 Answer

Zoom error


Just fixed the same problem on mine. This is what I did:
Unscrew 6 small screws around the lens casing and remove the casing (two layers ((rings)). Jiggle the inner most lens casing while you turn power on. The lens moving (i.e., auto focus) mechanism becomes unstuck. Voila.
The problem in my case was caused by the dust that accumulated inside the casing and caused the auto focus mechanism not to move freely.
Good luck.

Mar 05, 2008 | Fuji FinePix S7000 Digital Camera

1 Answer

No picture and lens does not retract


Well some cameras has features that does not use the LCD screen of the camera, because to save battery power or to get better shots with the focus ring.

You can just use the area where you focus your eye to aim and shoot the object of image.

Try to enabled the LCD screen feature.

The Zoom Lens Wiggles 3 times because it is programmed to zoom at the standard zoom size, this is totaly normal for camera in digital and analog types.

Mar 05, 2008 | Sony Cyber-Shot DSC-P100 Digital Camera

1 Answer

Viewfinder jammed


The mechanical link between Lens on V/F element has broken - Only Olympus will be able to do anything for you -check out the support site.

Aug 19, 2007 | Olympus Camedia C-5050 Zoom Digital Camera

3 Answers

Focusing the 770


Tom, It's best to do the zoom first, then focus (if you are using the autofocus).

Sep 11, 2005 | Sony Cyber-Shot DSC-D770 Digital Camera

Not finding what you are looking for?
Fuji FinePix A330 Digital Camera Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...