Question about Denon AVR-2307Ci Receiver

1 Answer

No display the receiver is working but there is no display shown.... any suggestions? thank tony

Posted by on

  • 2 more comments 
  • MrFitchell May 28, 2008

    I too have been using my Denon AVR-2307CI for about a year now and all of a sudden the display is not showing. The receiver power button shows red while off and when I turn it on it blinks green three times and then powers on solid green. All features work fine, as I remember which channel is for what. I have tried pressing different buttons like the dimmer button but I cannot get the display to show anything. Any Ideas?

  • gallagher13 Sep 25, 2008

    Same problem same issues. Is there are glitch in the receiver & is there a fix?

  • cali1 Nov 16, 2008

    1 year and 4 months and same has happenned. Working other than the display has suddenyl gone - any suggestions?

  • Anonymous Nov 22, 2008

    I have the same problem, does anyone has done a firmware?

×

1 Answer

I too have mine for 1 year and all of sudden it powers up for stanby and sound is produced but no display?

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought an Onkyo HTP-693 and hooked it up exactly how its shown in the owner's manual. When the system tests the speakers, it doesn't detect the front right. Any suggestions?


Hi Quintin, I would suggest that you disconnect your speaker and reconnect it making sure that the speakers connection is correctly made. If so try swapping the right and the left to see if its the speaker that is causing the problem. You can email me at askOnkyo@us.onkyo.com, Thanks, JT

Sep 26, 2015 | Onkyo Audio & Video Receivers

1 Answer

How do I get the electronic digital display to light up.


Hi Dudley, I would suggest that you try the following reset:

To do the reset you need to turn the receiver on then on the front panel of the receiver press and hold the "VIDEO1/VCR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.

Thanks, JT

Sep 12, 2015 | Onkyo Tx-900 Quartz Synthesized Tuner...

2 Answers

Surround problem with Yamaha HTR-5930 5.1 Channels Receiver


The signal that comes from most tv's via the optical output is a stereo signal only. That is what your receiver is reading. You would have to manually set your receiver to decode the signal into surround,.

Apr 18, 2013 | Yamaha HTR-5930 Receiver

1 Answer

No DTS-HDMA or Dolby TrueHD shown on display


DTS-HDMA and Dolby TrueHD cannot be passed to your receiver via bitstream on the PS3. DTS-HDMA cannot be decoded either so you're out of luck there.
Dolby TrueHD can be decoded internally on the PS3 assuming your firmware is up to date. Set the Blu-ray HDMI output to PCM and you can then pass it to your receiver.
If this doesnt work, do a system update on your PS3.

Jan 24, 2009 | Onkyo TX-SR606 Receiver

2 Answers

Volume fix problem


FIX ZONE @ SOUND - STUCK ON "ZONE 2 - FIX" 1. Press "Amp" button (right side of remote - 1/3 way down) 2. Press "Menu" button (center of remote - 1/2 way down) 3. Press "TV VOL" button (green letters) until "Manual Setup" is displayed on receiver 4. Press "Enter" button (green letters) 5. Press "TV VOL" button (green letters) until "3 Option Menu" is displayed on receiver 6. Press "Enter" button (green letters) 7. Press "TV VOL" button (green letters) until "D Multi Zone" is displayed on receiver 8. Navigate from there Good Luck! This worked for me.

Aug 02, 2008 | Yamaha RX-V659 Receiver

1 Answer

Subwoofer-no output


ther should be a diagram in the left hand corner of display of speakers hooked up, make sure sub is shown right under the left right (and possibly) center speaker icons. under adjust, there is a subwoofer volume level. Under settings there is sub (yes, and no for on and off) there is a sub crossover frequency, and i believe there is also a "LFE" att, which is another subwoofer level.

May 23, 2008 | JVC RX-8020V Receiver

1 Answer

Surround sound


Are there any wires in the back touching? Are any of the surround speaker wires touching

Feb 10, 2008 | Yamaha RX-V750 Receiver

1 Answer

Need to ID Capacitor


Tony, this is an incorrect substitution. The cap voltage should be higher. They probably ran out of the cylinder types. I'm surprised to see such high capacitance value however.

Aug 24, 2007 | Denon DRA-375RD Receiver

1 Answer

No receiver display lights


Hi ripper

The unit has a built in display dimmer, with a button to control the level of brightness from the display both on the remote, and the front panel.Try this

regards
Graeme

Nov 16, 2006 | Onkyo TX-SR601 Receiver

Not finding what you are looking for?
Denon AVR-2307Ci Receiver Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...