Question about Maytag MMV4205 Microwave Oven

1 Answer

I would like to know whether the factory blower orientation for MMV4205AA had changed since 2000. Was it changed from top vent to circulating (into the room)? If it did, when did this change occurred? If the change did occur, can I obtain the related installation instructions to prove it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 3,740 Answers

Here are the instructions for re-orentation of the blower.

The unit is shipped in the room vent configuration. The blower is re-orented for a wall vent.

http://www.youserguide.com/wiki/Whirlpool_8101P641-60-011

The page numbers for the manual are changed at the top of the document.

For roof vent configuration:

Here are the instructions for re-orentation of the blower.

http://www.youserguide.com/wiki/Whirlpool_8101P641-60-012

The page numbers for the manual are changed at the top of the document.

Wall plate installation is on page 13

Here are the instructions for the wall plate.

http://www.youserguide.com/wiki/Whirlpool_8101P641-60-013

The page numbers for the manual are changed at the top of the document.

Thanks for choosing FixYa

Kelly

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the front exhaust to top exhaust on a Kenmore microwave/hood


Hi,

In order to change the venting on the microhood you need to uninstall the unit and at the top of the microwave is the blower unit. Remove the cover, flip the blower and you should then see the fins on the motor, reinstall the unit under the cabinet and your good to go. I hope this helps, good luck

Mar 15, 2015 | Kenmore Microwave Ovens

1 Answer

Need to know if I can convert it to outside vent


This unit has a three way exhaust capability on it. There is a plate on the back that you remove to set the blower housing to back, top or frontal exhaust. You take the plate off and then just lift the blower assy. up and then reset it back into position for the direction that you want. It may be missing the vent louver for outside exhaust if it wasn't left with the unit when it was installed.

Sep 17, 2013 | Sharp R-1850A Convection/Microwave Oven

1 Answer

We have a sharp 1480 and have to mount it with no outside vent. Can this be done? patqlt@verizon.net


Most of these over the range models come already set up for unvented operation. That is, set up for use with no outside vent. The oven will filter air through the a charcoal filter inside the upper grill and the vent covers underneath. If you ever wish to change the operation to allow the unit to vent outdoors, you need to change the direction of the blower fan assemby inside the top of the microwave oven. These instructions should be listed in the installation manual that comes with your oven.

Aug 16, 2010 | Sharp R-1480 Microwave Oven

1 Answer

Samsung SMV blower installation


Most Microwaves arrive ready to vent back into the room. For filtered air returned to the room it should face toward the front. For top vent, point to the top. for rear wall vent point toward the back.

Jan 20, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Have whirlpool gold accuwave micro hood combo model# GH51884XPS5


The inspector is correct, air should be coming through the top louvers, although you sometimes will have a little air coming from the sides and back. Drop the microwave and see which way the blower is rotated, towards the louvers or towards the back or top. Some units also have a panel that blocks the venting from going the wrong way. Good Luck, Appliance Specialists

Dec 15, 2009 | Whirlpool GH8155XJ Microwave Oven

1 Answer

GE JVM1640 micro wave oven


You can check and / or correct your installation with help from the installation instructions.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Feb 04, 2009 | GE JVM1640 Microwave Oven

1 Answer

Concerning Microwave oven Model MH2175XS I am following the installtion instruction phamplet to change the vent fan from inside circulation to outside by removing the two blower screws on the back and...


Looking at the pamphlet, it sounds like you're doing everything right.

It sounds like something is a little bent or out of alignment making it stick.

Maybe you can take the tip of the screwdriver, and push against the motor assembly a bit to loosen it?

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

b4915a2.jpg

Aug 11, 2008 | Whirlpool Microwave Ovens

1 Answer

Partial venting


Are you running the vent fan whenever you cook on the stove top? You should.

And you should run it on high if you're having steam problems.

Otherwise, you'll need to do something like use a small counter top fan to help circulate the air better.

Please let us know if we can help further.

We're happy to help and we appreciate your thoughtful rating of our answer.

May 28, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

6 Answers

Maytag MMV4205AA - Just went dead


It is a thermal fuse Ijust don't know where it is located

Apr 15, 2008 | Maytag MMV4205 Microwave Oven

Not finding what you are looking for?
Maytag MMV4205 Microwave Oven Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...