Question about Siemens Gigaset 4215 Cordless Phone

1 Answer

I have a gigaset 4215 and it has terrible reception. It makes these awful clicking noises and then the battery dies.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,
Try with another phone.If the phone line is ok then the fault is with the power supply of the base station.When the power supply is defective this type noises occur and phone dies due to power failure.This could be due to fault in voltage regulator,capacitors.

Some times jack of the headphone could be a problem.open up the phone and get inside the jack area and tweek (bend) the contacts

If your phone uses battery then it is stone dead.Because of this it is not able to produces the signal.When there is no enough voltage it will make distortion and noises and dies.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCA DLP HDTV making terrible noise


your color weel is going bad and needs to be replaced

May 19, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

How do you reset the base and handset of a Siemens 4215 to "0000" ?


My Siemens Gigaset AS15 Cordless Phone is constantly calling the same number, no matter which number I dial! What shuld I do?
Thank you.

Jan 31, 2010 | Siemens Gigaset 4215 Cordless Phone

1 Answer

Display shows "line in use


You should contact your service provider and have them reset your phone line connection. They should be able to do it remotely.

Sep 12, 2009 | Siemens Gigaset 4215 Cordless Phone

1 Answer

Registering a Gigaset AL185 handset


i couldnt find a link to your owners manual, but, if you go into the menu in your phone and scroll down to "register handset" that should work

Jun 21, 2009 | Siemens Gigaset 4215 Cordless Phone

1 Answer

Gigaset 4215


Did you check to see if the battery leaked? I had a similar experience and it was because one of the batteries had leaked. This might also explain why the keys are stuck.

Jul 09, 2008 | Siemens Gigaset 4215 Cordless Phone

1 Answer

Phone holds charge from 12-55 min. and then goes dead


Your handset or charger has gone bad (provided you installed rechargable batteries), or both. The previous user may have installed alkaline batteries (is their a white powdery residue in the the charge compartment?), and that can ruin the charge circuit. Either way, you probably need to contact repair. You can go to www.cordlessrepair.com

May 23, 2008 | Siemens Gigaset 4000 Phone

1 Answer

Siemens gigaset 4215


Then the base is bad. I have 1 base like that also... nothing can be done other than send it out to be rebuilt.

Sorry,

Geno

Mar 20, 2008 | Siemens Gigaset 4215 Cordless Phone

2 Answers

Phones will not register


Try this:
Pick a handheld, press Menu - H/set settings - Reg Handset - Select Base 1, enter 0000 as password. Now on the bottom of the base station press and hold the Register button in for about 10 seconds or until the h/set beeps.

Geno

Jan 15, 2008 | Siemens Gigaset 4215 Cordless Phone

2 Answers

My siemens gigaset 4215 and 4000 don't work and need some kind of code whats the code?


Hello, Almost never is it the handset that is bad when those symptoms occur. It sounds as if your base has gotten hit by a power surge and won't boot (the handset now can't "talk to" the base and its always searching for it). Most people report this after a storm has passed through their area. You can try re-registering the handset to the base, but unfortunately it probably won't work, sorry. You can order the base only and register your handset to the replacement base when you get it. To order a replacement base using google, search for Siemens Cordless Repair and click the first non sponsored link. Good Luck

Dec 08, 2007 | Siemens Gigaset 4000 Phone

Not finding what you are looking for?
Siemens Gigaset 4215 Cordless Phone Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Siemens Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...