Question about Bosch WTMC4321US Electric Dryer

1 Answer

How to clean lint inside Bosch DLX Serie WTMC4321

Posted by on

  • lefebvre1 Sep 13, 2010

    Yes i will get that type of brush
    Thank You



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 347 Answers

If the lint filter its self is cleaned after each use no other cleaning should be required. If excess lint is allowed to build up on the filter screen or if the lint falls off the screen when you pull it up and remove it to clean,,you can use a lint brush specifically designed for cleaning out dryer filter housings. These brushes are readily available at most every home center ( lowes, homedepot ect.) They are correctly sized to get down into the filter opening to remove any residual lint buildup....

Posted on Sep 13, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wtmc3500uc-bosch front load dryer -lint light preventing the dryer from working

You may very likely have to take the machine all apart and clean the inside lint tubes, as they may be plugged up.
If this is the problem, it is because the lint inside the machine is so bad that to continue to run it could cause it to catch fire.
I have cleaned 6 machines in the last 2 years that were so bad I got a shoe box of lint out of each machine.
God bless your efforts.

May 19, 2016 | Dryers

1 Answer

My Bosch Nexxt DLX Dryer is not getting hot

you need to reset the high temp sensor. its in the back next to the vent. you might be able to use a long screw driver and push it in. Mine is just about an inch above vent and on the right side. Use a flashlight to look in and you should be able to see it.

Mar 23, 2013 | Bosch Nexxt DLX WFMC4301UC

1 Answer

Bosch vision 300/500 dlx series washing machine: how do you remove the front kick plate to access the pump?

Bosch vision 300/500 dlx series This video will show you how to change the pump washing machine Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Jan 08, 2012 | Bosch Washing Machines

1 Answer

I have a Bosch Vision 300/500/dlx and it cant get rid of the water, It had a message E 13, and i have cleaned the drain hose, I want to clean the Filter but I dont know where it is. when running the rinse...

I don't know your model, but the filter will be accessible without getting into the innards of the machine.

Look for something that looks like it might turn to unlock, then pull out located low down at the front or the back of the machine.

On my top loader the filter is housed in the spindle of the agitator post. Pulls out and reveals lint bag etc.

Dec 30, 2017 | Bosch Nexxt 300 Series WFMC2201UC

2 Answers

Replacement part

Bosch Nexxt DLX WFMC4301UC door seal replacement
This video will show you how to change a door seal on this Bosch front loader washing machine and the best
places to buy parts.

we have all
bosch repairs in our channel

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

Feb 11, 2010 | Bosch Nexxt DLX WFMC4301UC

2 Answers

Lint Error and shut down on Bosch WTA 3500

Hold the filter up to the light ,can you see thru it? wash with soft brush.filter sensor located inside duct right inside door ,clean off.look 1 inch silver probe.Hope this helps ,please rate my response :)

Jun 15, 2009 | Bosch Axxis WTA 3500 Dryer

1 Answer

Bosch dryer not workin

Sounds like the dryer needs a good cleaning inside the workings area. Have a technician take it apart, and have a vacuum handy to **** up all the lint. While in there, he can check the working parts.

Apr 24, 2009 | Bosch Nexxt WTMC 3300 Electric Dryer

1 Answer

Dirty Dryer

its blows dirt lint by the seall more when the vent going out home is pluging up need to desasemble dryer to clean it out

Mar 20, 2008 | Dryers

Not finding what you are looking for?
Bosch WTMC4321US Electric Dryer Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dryers Experts


Level 3 Expert

80339 Answers

Lawrence Oravetz

Level 3 Expert

10291 Answers


Level 3 Expert

409 Answers

Are you a Bosch Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides