Question about JVC GR-DX27 Mini DV Digital Camcorder

1 Answer

When i switch on i don't get any image on the screen

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,812 Answers

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to usually be repaired by a qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Posted on Sep 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer avh p6300bt


You switched a memory/ display with a power wire

Jun 14, 2013 | Car Audio & Video

1 Answer

Desact monitor


When the following symptoms, that is, to replace a laptop LCD screen:
No image on the screen, but the power light stays on
Dark display but still readable
Between the screen flashes on and off 1/2 to several seconds
Power light stays on, but no display and sound
No image on the screen, but LCD TV still has sound
Picture cycle on and off, as well as high-power LED lights

Jun 07, 2013 | Computers & Internet

1 Answer

The screen don't show image


press the eye/lcd button just under eye piece.

Dec 20, 2012 | Kodak Easyshare C140 8 2mp 3x Optical 5x...

1 Answer

Acer Aspire 8920 screen image is good but prints very dark -


I'm sure you haven't used all printers. Anyway, are you printing color images such as pictures, etc. If so try using a glossy paper. The colors and images are much more true colors on glossy paper, and it don't **** up your ink.

Mar 28, 2012 | Computers & Internet

1 Answer

When i switch on my Vivitar Vivicam 7024, it switches on normaly and resumes normal function (e.g. taking photos, videos, and looking at images). but the screen itself is damaged, it has a large black...


I'm sorry to say that but the screen of your camera appears to be damaged.
May be YOU didn't drop it, but someone else might have. Most probably the screen was pressed hard against something (might be while stored). That's what the black circle and colour lines suggest. The colour lines are somewhat like colours you see when oil is put on water, isn't it? That means the LCD screen is damaged.
I suggest to take it to repair shop and get the screen replaced, specially if you don't have experience repairing cameras.

Aug 30, 2011 | Vivitar ViviCam 7024 Digital Camera

1 Answer

My dad has a fuji finepix a500 camera. lately, he's noticed that some of the images on the screen are showing instead as a blue screen with "read error". how can we fix this/what has...


What happens on your camera is related to the pc modifying the image file, hence the camera can't read it as they use different formats to write and read the images.
Can you see the pictures stored on your father's camera on the PC? Because if that's not possible, then the camera has an internal problem and you might have to consider taking it to a repair shop, or even consider buying a new one.

Jul 12, 2011 | Cameras

1 Answer

I have audio but no video i cant even see the input title when i change it but i can hear it switch from my cable to my dvd


Good day!!!


if your TV don't have a back-light the problem is the inverter board please try to replaced it..

if the Tv have back-light but no picture or image of the screen the problem is the T-con board please replaced it...


thanks for suing fixya...

Jul 10, 2011 | Sanyo DP37647 37 in. LCD TV

1 Answer

How to enlarge a picture that is scanned or copied? When i scan or copy a picture it is too small and I want to enlarge it in order to view it better.


hi

Open an image. Go to the Image Menu and select Image Size. This is where you can change an image’s resolution and print size (width and height). The following Image Size dialog box will appear:
image_size_cs.gif
Notethat the width and the height of the image as you view it on yourmonitor is not necessarily representative of the image’s actual widthand height—i.e., the size it would print out at (print size).Average monitor resolution is 72 dpi. If you view a 72 dpi image at100% in Photoshop, chances are that it will appear on your screen inits actual print size. However, this is not true when viewing a 300 dpiimage. A 300 dpi image viewed on-screen at 100% will be enormous. Don’tget tricked into believing that what you see on your monitor is whatyou’ll get when you print or place the image into another application.The best way to determine what your image’s actual print size will beis through the Image Size dialog box.
When the Resample Imagebox is checked, any changes you make to an image’s width or height willnot change the image’s resolution, and as such, any changes you make toan image’s resolution will not affect the image’s width and height.Keep in mind, however, when you increase width and height, orresolution, with the Resample Image box checked, you are adding pixelsto your image. These pixels don’t actually exist so Photoshop mustcreate them. As such, you will succeed only in degrading the quality ofyour image.
If you want to increase an image’swidth and height, or resolution, then uncheck the Resample Image box.Now any changes you make to the image’s width and height will changethe image’s resolution, and vice versa:
  • If you decrease resolution, the width and height will increase.
  • If you increase resolution, the width and height will decrease.
  • If you increase the width or height, the resolution will decrease.
  • If you decrease the width or height, the resolution will increase.
Thebest way to increase the width and height of a scanned image is to scanthe image in at a high resolution (about twice what your finalresolution should be), and with the Resample Image box unchecked, decrease the resolution. Once the image width and height is where you want it, you can then check the Resample Imagebox and type in the resolution you want if the resolution is too high.At this point, as long as you don’t increase resolution, or width andheight, your image quality will not suffer.

Aug 07, 2010 | HP Officejet 5610 All-In-One InkJet...

2 Answers

Impossible to connect camera with PC. no driver in the PC for camera powershot A510. What's the matter?


Just figured this one out. Man, they don't make it easy. I'm borrowing my roommate's PowerShot A510 and since it has a USB port going out, I'd assume I could simply connect the camera to my PC and access my images directly. Almost every other camera I've seen will register itself to Windows as a straight USB connection (prompting the Windows screen asking how you want to open the connection - 'open folder' etc). This one just sits dead quiet about things :)

If you've just bought this camera at a garage sale or are borrowing it or for whatever other reason do not have the "bundled" software and driver CD or have the camera's serial number, do not bother trying to find windows drivers or try to obtain any software from Canon. You won't get very far.

FINALLY found the solution in the User's Manual (which was free thank God). You can download the manual here: http://usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a510#BrochuresAndManuals
(Select your operating system and download the "PowerShot A520/A510 Camera User Guide". File name is PSA520510CUG-EN.pdf)

In the User Guide, page 107 (I'll paraphrase):
1. Put camera in Play mode (the switch on the back (green arrow in green box)
2. Press Menu button (center one of the three along the bottom of the view screen)
3. In the 1st menu option (Play Menu, again green arrow in box highlighted), use the wheel button to scroll down to highlight "Transfer Order". Press Set (center of wheel).
4. You should now see "Transfer Order (DPOF) at the top of the screen and "Qty. of images 0".
5. Below "Qty of images 0" you'll see "Order", "Mark All", and "Reset". Order lets you select individual images; Mark All marks all current images for transfer; and Reset is reset. Press Set to choose.

Note: pressing the Menu button while selecting images brings you back to this main screen. If you are already at this main screen and you aren't ready to do your transfer yet, DON'T press the Menu button from this screen as it will initiate the transfer to your computer. Not a horrible thing, but might cause a mini freak-out.

7. Once you're selected the images you want to transfer, from the main Transfer Order window (now showing "Qty. of images" with a count of the images you selected), press the Menu button.

8. You'll see a white progress bar at the bottom of the screen. Don't worry! it's not deleting files or something bad.. (my first thoughts :) ..
9. Go to your PC and Voila! the Windows AutoPlay screen is now active!
10. Proceed with normal Windows USB operations (transferring at least, I didn't try any deletion).

I hope this helps somebody else out there who spent the last 3 hours trying to dig through internet hell to get this to work.

Atm, this is as much as I know so I probably don't have any good answers for any questions. Sorry :))

But, hope this helped at least!

Mar 12, 2010 | Canon PowerShot A510 Digital Camera

1 Answer

My screen has been going black


Hi this is the way how to examine what's wrong with your LCD monitors. Power on both CPU and monitor. After went black, you have check if you can see the image on the screen or not by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely. If you can see the icons or any image, there will be a minor problem. Like mine, I can see window image using flashlight and check lamps inside. Some of them were broken and it is easily replaced. If you cannot see anything on the screen, there'll be some problems with inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high temp. If you don't have soldering tool, you better go get a technician to do so.

Mar 05, 2008 | Mag Innovision LT782S 17" Flat Panel LCD...

Not finding what you are looking for?
JVC GR-DX27 Mini DV Digital Camcorder Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...