Question about Canon PowerShot A1100 IS Digital Camera

1 Answer

My camera says Lens Error and it needs restarted how do I do that

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. Please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LENS ERROR, RESTART CAMERA...


CANON IXUS 561
Lens sometimes does not extend and error message 'lens error restart camera' appears when camera is turned on. This does not work without several tries and much button pressing. Problem is not caused by finger(s) in front of lens barrel.

May 20, 2010 | Canon PowerShot A560 Digital Camera

2 Answers

Lens error,restart camera


Hi,

This error occured when lens is prevented from properly extending or retracting.when pressure is applied to the lens or the area surrounding the lens while handling the camera.
Avoid applying pressure to the lens and surrounding area:
  • Do not touch Lens while shooting.
  • Make sure the camera is off before the camera is placed back in the case.
If you cannot clear the error code by turning the camera off and then on again then your device need to be repaired.

Rating the solution is highly appriciated...Good Luck.

Feb 28, 2010 | Canon 8.2-Megapixel Digital Camera Lens

1 Answer

How do you restart the Canon G9 camera?


There is not way to reset it if you get “lens error”. The lens stuck, you need to send it for repair.

Aug 03, 2009 | Canon PowerShot G9 Digital Camera

1 Answer

Lens error, restart camera


Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.

Apr 28, 2009 | Canon PowerShot SD850 IS Digital Camera

1 Answer

Lens Error, Restart


Nikon System error help????

Sep 05, 2008 | Nikon COOLPIX L12 Digital Camera

3 Answers

How do you fix 'lens error restart camera' I put it in my bookbag. I guess i threw my bookbag around and now i have this "lens error, restart camera." The lens froze halfway and it's staying that way....


WE WENT TO THA BEACH AND TOOK SOME PIC AND LATER THAT DAY WHEN WE WENT TO TAKE MORE PIC IT SAID LENS ERROR RESTART CAMERA BUT WE DON'T KNOW HOW TO RESTART THE CAM

Aug 18, 2008 | Canon PowerShot SD630 Digital ELPH / IXUS...

5 Answers

Lens Error, Restart


Hi

What you are seeing is a generic stuck lens error message, turning off the camera and turning it on again will not fix the lens unfortunately.

Your lens needs to be cleaned or repaired, and if it cant be repaired it needs to be replaced. There are online places that will do it for a decent price and there are others that overcharge by way too much.

Fixya rules prevent me from giving you a link to anything off Fixya that would help you fix your camera.

Good luck from....

Darntoothysam com

May 01, 2008 | Canon PowerShot SD1000 Digital Camera

1 Answer

Lens Error, Restart


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Dec 31, 2007 | Cameras

1 Answer

Help please


I'm assuming you have a lens error which is giving you the restart message.
It is kind of misleading, but to restart the camera means to power cycle the camera or remove and reinsert the battery.
If you do have a lens error, if restarting the camera doesn't work, you'll need to get the lens fixed if to remove the error.

Dec 17, 2007 | Canon PowerShot SD600 Digital Camera

Not finding what you are looking for?
Canon PowerShot A1100 IS Digital Camera Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1917 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...