Question about Roper RAX7244KQ Top Load Washer
Can you please assist me in finding out what my problem is ?
The washer will fill , it will not agitate just makes a buzzing noise. when you move it over to the spin cycle it will spin and drain just fine.
SOURCE: Washer won't drain
Mustache, sounds like you have a broken lid switch. No spin, no drain usually a sign of this. Check to see if the actuator is making the lid switch, or the switch itself is bad. Part number for the switch is 8318084. Catriver, post back.
Posted on Jul 30, 2006
I had the same problem and ended up replacing the control board which solved it. Contact Westland Sales at 800-356-0766 ext. 5 for tech support.
Posted on Jun 02, 2008
Hi. your timer assembly is faulty. it is not initiating the spin and proper wash cycle due to this malfunction. the timer is responsible for the actions and commands. if its defective, it will not carry out the initiations correctly.
CLICK HERE TO BE DIRECTED TO THE PURCHASE PAGE FOR YOU REPLACEMENT TIMER.
Posted on May 23, 2009
grab the agitator at the base and give it a quick push upward..remove and see if the white dome with bolt holding it down is stripped on the inside where it splines onto the transmission shaft. :)
Posted on Jun 13, 2009
Tips for a great answer:
Nov 02, 2015 | Washing Machines
Aug 08, 2011 | Roper Washing Machines
Jun 14, 2011 | Whirlpool LSR7333 Top Load Washer
Jul 13, 2009 | Whirlpool LSB6200KQ Top Load Washer
Jun 15, 2009 | Roper RAS8445KQ Top Load Washer
Oct 13, 2008 | Washing Machines
Mar 17, 2008 | Roper RAS8445KQ Top Load Washer
Jul 30, 2006 | Roper RAX4233PQ Top Load Washer
321 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: