Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

RCA D52W58 52 in

The main problem everytime i connect my composite cables either if its hdmi or svideo cables screen tends to go off and on.... the tv stay on just picture tends to go off and on what might be the problem

Posted by on

  • OG_WaSuP May 14, 2008

    forgot to mention tv works fine with out any cable connected to any of the rca inputs or any hdmi cable connected

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 5,138 Answers

Replace SSB board.

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I attach a HDMI cable to an Old Samsung TV Model # HLN5065W1X/XAA


Gina, these are all the inputs on your TV
S-Video 4-pin DIN (2 sets) Back Composite RCA (2 sets) Back Component 3 RCAs Back Component (HDTV) 3 RCAs (2 sets) Back RGB 15-Pin Dsub Back Tuner Co-ax (2 sets) Back DVI Digital Input 24 pin DVI Back S-Video 4-pin DIN Front Composite RCA Front
You can not use HDMI cable with this set up.

Feb 22, 2016 | Samsung Projection Televisions

1 Answer

It does not have a HDMI cable connector that my cable box requires. What can I do??


Connect it using the composite and audio RCA connectors(the round red, white and yellow ones) that both your tv and the cable box have.

Aug 20, 2010 | Mitsubishi WT-42311 42" Rear Projection...

1 Answer

My tv no have volume


If you are using rca cables (red, white, and yellow connectors) then make sure they are completely pushed into the correct input.

If you are using S-video, make sure you have an rca audio cable (red and white) connected to the same input of the Tv as the svideo cable.

If you are using component (red, green, and blue) make sure you have an rca audio cable (red and white) connected to the same input of the Tv as the component cable, as well as the source of video.

If you are using hdmi, make sure the cable is secure and all the way in.

Also, check to make sure your tv isn't muted, it happens accidentally sometimes. Make sure the volume is up high enough as well.

If all of your cables are secure and attached right, and it still doesn't work, you may have blown the speakers or the internal electronics (of the tv) may be damaged.

If you need more info, contact me.

Thanks for asking
-Josh

Feb 26, 2010 | Samsung HLS4676S Television

1 Answer

How can i watch movies from computer to my tv


You probably need to get a composite video output card for your computer. Actually, I've seen many cards that have both a composite video output AND a DVI output port on 1 card. The DVI output will give you a noticeably sharper picture than composite video, but you need to check if your TV has a DVI or HDMI input. (If it was manufactured after 2000, it probably does.) If you TV was manufactured after 2006, it probably has 1 or more HDMI inputs instead of DVI. You can buy a DVI to HDMI converter cable. That takes care of the picture; to get sound to the TV, you will need to connect separate sound cables to your TV. Your computer needs to have a line-level output jack on it's sound card, and you will need to get an adapter cable (from Radio Shack) to convert the stereo mini-plug to 2 RCA type plugs to plug into your TV. And that should do it!

Dec 17, 2009 | Mitsubishi WS-65513 65" Rear Projection...

2 Answers

I would like to know if I can connect a HDMI cable from My tv model WS-65315 to a Direct TV HD receiver?


NO> If your TV supports and have HDMI connections and your HD receiver has an HDMI output then you should have no problem displaying Video. Just make sure you change the input signal of your television to HDMI input. After looking at the spec's of this model these are the following inputs you have. your best picture quaity would be to use componet cables instead, which can show full screen 1080i format, your television does not show at 1080p whis is what HDMI is known for.
Connectors
Rear Input Connectors S-Video x 2 - Component x 3 - Composite x 2 - DVI x 1 - RF x 2 - 1 x RS-232C - Audio (RCA) x 6

Front Input Connectors S-Video x 1 - Composite x 1 - Audio (RCA) x 1

Rear Output Connectors Composite x 1 - Audio (RCA) x 1 - RF x 1

Another good option is use to use a DVI to HMDI connector and hook it up this way. But note: you will have to use audio cables for the DVI input.

Sep 28, 2009 | Mitsubishi WS-65315 65" Rear Projection...

1 Answer

CANNOT TURN OFF CLOSED CAPTION ON 52" JVC TV


Does it use a cable box or are you using the tuner in the TV?

If you're using the tuner in the TV, try unplugging it for 5 minutes and then plug it back in, do a new channel scan and see if the CC goes away. If not, contact JVC to find out how to reset it. If it still does not work, you might need to have your main board replaced.

If you're using an external tuner plugged into a video input port (such as a cable box or satellite box) then the external box is at fault since TVs don't have CC available through their composite or component or svideo or hdmi ports.

Jun 19, 2009 | JVC HD-52G787 52" Projection Television

1 Answer

RCA HD52LP: Composite video inputs don't work


RCA Authorized service tech looked at it. He determined that the DM Module need to be replaced. The part alone costs $550 + labor. Since the HDMI and component video inputs seem to work, he suggested buying a VCR DVD combo with HDMI output which would be far less than repairing the tv itself. I'n researching the possibility of purchasing the part myself.

Jun 08, 2009 | RCA HD50LPW42 50" Rear Projection HDTV

1 Answer

When connecting video or set-top box using composite video cable picture is black and white. If I use S-video I get colour. Video only has scart and tv only has composite/component/s video connectors so I...


you really cant convert to component. it defeats the whole purpose of upgrading your tv. with your tv you should be using hdmi to connect all your devices your cable box should deffinatly have one. any time you connect component to something else you will get black and white hdmi is totally digital where as component is still analog pluse you dont need audio cables with hdmi its just one digital cable

Sep 21, 2008 | Projection Televisions

1 Answer

Model 60PL9200D/37 no sound


What device is connected to TV: cable, sat box, dvd player? What type of cable are you using to connect to the accessory device?

For a red, white, and yellow cable:
I cannot hear sound from the television when connecting to the AV1 input. What do I need to do?
Answer When you connect the accessory device to the AV1 input of the TV using either component video cables (YPbPr) or composite video cable (Yellow), you must connect the audio output from the accessory device to the 'INPUT AV1 AUDIO L R' of the TV using the RCA audio cables (Red and White).
If the connection is good,

Check to ensure that the AV1 audio source from the TV on-screen menu is selected to AV1.
  1. Press the 'MENU' button on the remote control.
  2. Press the cursor up/down to select SETUP and press the cursor right.
  3. Press the cursor up/down to select SOURCE and press the cursor right.
  4. Press the cursor up/down to select ANALOG AUDIO IN and press the cursor right.
  5. Press the cursor up/down to select AV1 and press the 'OK' button.
  6. Press the 'MENU' button to exit the menu.
Make sure that the volume on the TV and on the device is set at an audible level and also that the sound hasn't been muted.

For HDMI,
The picture quality is good but the TV does not produce any sound when connected to an accessory device with an HDMI to HDMI cable.

Answer
  • The TV's behavior is considered to be normal as some accessory devices have an HDMI audio output setting that requires to be turned on when using an HDMI to HDMI connection.
  • Check the on-screen menu of the accessory device to ensure that the HDMI audio output is set to ON.
  • In some cases, you may need to set the digital out audio stream of the accessory device to PCM.
  • For detailed information, please refer to the user manual of the accessory device.

Apr 07, 2008 | Projection Televisions

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...