Question about Admiral AW22 Top Load Washer

1 Answer

IT ALWAYS GOES UNBLANCE - Admiral AW22 Top Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Witch way does a stant thermo face point up or down


If there is a small vent hole that goes up. If it is a butterfly type the opening when it gets hot should be up. If it is a circular type valve it does not matter except if there is a small hole that always goes up. The wax element part always goes to wards the engine.

Nov 08, 2014 | Cars & Trucks

2 Answers

Nokkia 5130 -screen goes white and nokia logo appears like always, then the screen goes white and after several seconds it turns off...


nokia 5130: when I try to turn on the phone, the screen goes white and nokia logo appears like always, then the screen goes white and after several seconds it turns off

Sep 22, 2011 | Nokia 5130 Cellular Phone

2 Answers

My washer won't spin. It stop and gave me a warning "UE". What is this mean. Please help me.


I have a LG LNC6753A71 the washer agitates drains rinses but won't spin. The motor runs but it won't spin.

May 01, 2011 | LG WM0642H Front Load

1 Answer

How find orginal shure mic?how? and how to make cable? what is balance and unbalaned cable? better balence ya unblance cable


Unfortunately, there are many counterfeit Shure microphones out there. Each of the counterfeit manufacturers makes the fakes slightly different. Thus, there is no one thing to look for. The best thing to do is to purchase the mic from an authorized Shure dealer. Then, you can trust that it will be genuine.A balance cable has three wires (such as XLR connectors), and unbalance cable uses just two wires (such as a two conductor 1/4" connector.

Jul 28, 2010 | Shure Beta 87A Professional Microphone

1 Answer

Neptune Washer Spin Cycle


If your FAV6800A or FAV9800A wash tub is banging around in Spin Cycle of the Wash Cycle and your Control Board signals a dC or uC error code to the console I feel you have a Clutch malfunction. I feel the TDS is working as designed with the unblance error code shut down.
See my Clutch Fix post for more info related to dC and uC unbalance errors with the FAV6800A and FAV9800A TL’s and the repair action…….Rich

May 10, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Spin cycle is not completing, code DC appears.


If your FAV6800A or FAV9800A wash tub is banging around in Spin Cycle of the Wash Cycle and your Control Board signals a dC or uC error code to the console I feel you have a Clutch malfunction.

I feel the TDS is working as designed with the unblance error code shut down.

See my Clutch Fix post for more info related to dC and uC unbalance errors with the FAV6800A and FAV9800A TL’s and the repair action…….Rich

May 10, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Uc code on readout then dc code w/ 7min left


If your machine is a FAV6800A or FAV9800A the unblance error are most likely due to a Clutch malfunction. See this post Clutch Fix to see what is involved to re-lube/replace the clutch in the FAV6800A or FAV9800ATL. If you or someone you know has basic mech. skill sets you can do this it’s just a tight work area.

Here are some handy links; The Service Manual for reference. Sears Parts Direct for reference.

I'll try to help if you want to DIY.....Rich

Feb 24, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Can not set ring tone always goes back to another


Hi

make sure you setting is in default settings

Thanks!

Mar 10, 2009 | LG KG225 Cellular Phone

1 Answer

Light sensor cadillac deville 1994 always read dark


i would check and make sure that this sensor is clean first and then i would look into having it replaced!! Welcome to the world of caddys

Dec 10, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
Admiral AW22 Top Load Washer Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Admiral Washing Machines Experts

Brad Brown

Level 3 Expert

17326 Answers

Sal De

Level 3 Expert

2699 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Admiral Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...