Question about Samsung Projection Televisions

Open Question

Samsung Model # SPS4243X/XAA picture has a red swirl that moves around the screen kind of like a broken kalidascope. Craig A. Wright www.bursma.com craigw@bursmaelectronics.com Bursma Electronic Distributing Inc. 614-299-9040/1-800-676-8926

Posted by on

  • Fuzzmeister May 14, 2008

    This is a plasma

×

4 Suggested Answers

ctf1800
  • 4402 Answers

SOURCE: I think I have a convergence problem but looking through solutions I have become confused Help?

to tell which board you have there should be writing on the corner of the board in white.

Posted on Jan 29, 2008

  • 1039 Answers

SOURCE: snowy color screen & have sound

On the back of th panel are list Vs, Va voltages. Find the test point on the power brd. Labeled on one of the connectors. See if voltages match. If they are slightly off find coresponding trimmers and adj. if way off disconnect x and y sustain boards from power board. if stays low then replaced power board. if it is normal with x,y disconnected then one of sustain boards. if voltages all ok suspect panel. ry checking other inuts first to see if this is a vseo problem or not.

Posted on Apr 25, 2009

MNfisherman
  • 11896 Answers

SOURCE: great picture, no sound

There is most likely a faulty capacitor or resistor on circuit board for the audio ouputs. It will have to be tested to find faulty capacitor or resistor

Posted on Aug 27, 2009

  • 1 Answer

SOURCE: samsung 42'' model no.ln-t4053h 8 mod code#lnt4053hx/xaa

The panel costs over $800 to replace. The broken/cracked panel cannot be fixed as the glass inside is cracked. It is not worth repairing. However, I would be interested in it for the parts. If you still have it, would you be open to selling it to me at a reasonable price? Please call me at 310-770-1444. Thank You, Jeff

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would effect the picture quality the color wheel or lamp?


The color wheel is your suspect.......usually whines a bit
when bad. In a quiet room, you can hear it when the TV is powered on or off. It spins at 9,000 rpm ( wears out the bearing).
The lamp will not exhibit those symptoms....

Apr 26, 2014 | Projection Televisions

1 Answer

I have a samsung model hlr4667wx/xaa picture freezes


analog board can cause that symptom especially if the pic is freezing .

Jun 26, 2010 | Projection Televisions

1 Answer

Picture has wavy red swirls through the picture. I do not know if I want to throw good money to repair a 2001 HIT43UWX10B TV. Don't know the cost to fix this problem?


Projection TV sets have two very common problems listed below.

Problem #1) Convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 12, 2010 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Great picture, no sound


There is most likely a faulty capacitor or resistor on circuit board for the audio ouputs. It will have to be tested to find faulty capacitor or resistor

Aug 27, 2009 | Projection Televisions

1 Answer

Snowy color screen & have sound


On the back of th panel are list Vs, Va voltages. Find the test point on the power brd. Labeled on one of the connectors. See if voltages match. If they are slightly off find coresponding trimmers and adj. if way off disconnect x and y sustain boards from power board. if stays low then replaced power board. if it is normal with x,y disconnected then one of sustain boards. if voltages all ok suspect panel. ry checking other inuts first to see if this is a vseo problem or not.

Apr 22, 2009 | Projection Televisions

1 Answer

Samsung HDTV 1080I-Model#HCP4363W-Convergence Problem


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find a fix here
bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 21, 2009 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

The t.v.just went blank while watching it.


Power boards are like time bombs. When it's time is up, it's up. Since it is 3 yrs old, I would buy a new tv. Most TV parts only last 3-5 years anyways. It did a good job.

Nov 14, 2008 | Projection Televisions

1 Answer

I think I have a convergence problem but looking through solutions I have become confused Help?


to tell which board you have there should be writing on the corner of the board in white.

Jan 27, 2008 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Red line fault


· Samsung parts for convergance problem
· http://www.partstore.com/Part/Samsung/Samsung/BP9500142E/New.aspx

Aug 07, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...