Question about Sanyo PLV-Z2 Multimedia Projector

1 Answer

Hello, I have a Sanyo PLV-Z2 projector which is 5-6 years old (but the lamp is quite recent). The projector works fine when I turn it on, but invariably shuts down after some time, before the end of the movie. It can take 5 minutes, 10, 20 or even 1 hour, but eventually it shuts down. It's not hot, and there is no warning signal. Can you help me? Many thanks, Nicolas

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

Most likely a capacitor in the power supply is breaking down, after awhile. Capacitors are, other than bulbs, the components that age after a period of time. The larger ones in the power supply are electrolytic caps, and the chemicals age and dry out over time, eventually breaking down. If you change them all out, you will usually restore your projector to an "as new" type status.
This web page has some service manuals to units close to yours, and might help:
http://www.eserviceinfo.com/service_manual/datasheets_s_2500.html
Good luck, hope this helps, and thanks for using FixYa.

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo PLV-Z2 flashing then off


1,the fans is good , is ok
there is not an overheating situation ,only 5-10 minutes,
2,seems that the lamp ballast is defective
you need a new lamp ballast, unit price is USD80
Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: lampdeng@hotmail.com
http://www.lampdeng.com

Feb 16, 2014 | Sanyo PLV-Z2 Multimedia Projector

1 Answer

PLV-Z2000 Projector Your question about PLV-Z2000


what about the Projector Condition leds: POWER, WARNING and LAMP REPLACE? How are they lit? For good measure you should also clean the air filter (the projector might not be getting enough air to cool the lamp)

Jan 09, 2012 | Sanyo PLV-Z2000 Projector

1 Answer

Lamp for PLV-Z2000: Hello , I have a Sanyo Z-2000 projector. Aft...


1, the lamp is ok
2,the lamp ballast is ok
3,seems that the power supply or mother board is defective

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

May 12, 2010 | Sanyo Lamp for PLV-Z2000

2 Answers

What is the lamp life on a sanyo plv-z2 bulb and how to read the bulb life there are 3 numbers that come up when i check it


If I remember correctly, you hold down either the power or the menu button for 30 seconds... I believe it is the power button, and it will briefly display it on the screen, but this assumes it was reset at the time the lamp was installed. The counter counts up on this model, and the lamp replace light will come on at 3000 hours. I have 2 of these units, and I have gotten at least 5000 hours out of each lamp. Toward the end of the lamp life, it may start getting dim and/or have difficulty starting, but I probably wouldn't replace it until you either notice the dimming or the lamp fails, although I've heard some say they can damage the projector when they fail, I have not had any problems.

Dec 03, 2009 | Sanyo PLV-Z2 Multimedia Projector

1 Answer

When you are watching on projector sanyo PLV-Z2 it goes off and


overheating. possible fan malfunction. clean out the projector with canned air. dust keeps in the heat.

Oct 24, 2009 | Sanyo PLV-Z2 Multimedia Projector

1 Answer

My PLV-Z2,globe will not light up,power up to


ballast and/or lamp is bad and needs to be replaced. the ringing sound is high voltage issue.

Oct 04, 2009 | Sanyo PLV-Z2 Multimedia Projector

1 Answer

New Sanyo PLV-Z2 not bright


is this original lamp or refurbished one or compatible some thing.
how was performance of previous lamp when you pull out it? if it is still working for few minutes, you can confirm projector by reinstalling it.

Sep 04, 2008 | Sanyo PLV-Z2 Multimedia Projector

Not finding what you are looking for?
Sanyo PLV-Z2 Multimedia Projector Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...