Question about Vacuums

1 Answer

My logitech won't recognise my Sony TV "plasma". It's a KLV52500

Posted by on

  • mmisius Sep 13, 2010

    I have no idea how vacuums came up as the problem.
    Ok I bought a new logitech 650 when it came to adding the devices you want it to control I added my Sony Plasma KLV 52500 to the list. The little yellow explanation mark popped up saying that the 650 did noty have the software to control the Sony TV. As this TV has been around for at least a year. I don't understand why the 650 remote won't control it.
    Mark Misius

  • mmisius Sep 15, 2010

    Look I sent you a detailed decription of what was happening and ai haven't has a reply. So plesse refund my money as you don't seem to have a clue

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,153 Answers

Adding as much information as you can is much more likely to get you an answer.

that is apart from being posted in VACUMS.
I expect you could not find the correct area as the system here can be a PITA to get around.

You have two choices.
1. dumpt this question and post in the TV or a logitech area

Or provide me with more information as to just what it is you are trying to connect and how Model numbers etc and the actual problem,s you are encountering

Posted on Sep 12, 2010

  • Project NOMAD
    Project NOMAD Sep 13, 2010

    Probably a silly question but have you installed the software on your computer and done the update to the remote ?



    That would be my starting point.



    If you havent then here is your first port of call



    http://www.logitech.com/en-us/440/6621?s...

  • Project NOMAD
    Project NOMAD Sep 15, 2010

    I did add more information that you may have missed and it is a reccomended step to UPDATE the remote.



    This is much the same as you would update any equipment.



    However if you wish to abuse me feel free to email Lauren@fixya.com who will be more than pleased to issue a refund.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Robo sweeper


ARE THEY CLOGGED AROUND WHEELS WITH HAIR ,AND TRY SOME W D FORTY OIL ,

Apr 09, 2013 | As Seen On TV Robo Sweeper

1 Answer

TC-P50S30 Plasma HDTV won't come on blinks 7 times


That is a error code and depending (Panasonic?) on model means either power board or another issue---the error codes can sometimes be misleading or too vague to pinpoint to one board.

Note: these (all brands) sets only sell boards, no individual parts.

Not knowing your skill level you may be able to tell me that, the first thing would be to examine the power board for damage or puffed up filter caps---let me know if questions here etc.

Dec 11, 2012 | Panasonic Test Tool Part Tzsc09187

1 Answer

My Miele S3141 canister began acting strange this morning. No suction...so I took off the hose and checked for blockage, (nothing). Now I can't get the hose back on the canister. It just slips ar


see this causes and fix it. God bless you
Air filter:
If the vacuum cleaner won't pick up dirt and has no suction the air filter might be clogged. Remove the filter and either clean or replace it as needed.
Exhaust Filter If the vacuum cleaner won't pick up and has no suction the exhaust filter might be clogged. Remove and clean the filter, replace it if its torn or damaged.


Vacuum Hose If the vacuum cleaner won't pick up and has no suction the vacuum hose might be clogged. Remove the hose from the vacuum cleaner, stretch it out straight, shine a bright flashlight in one end and try to see light through it. If no light can be seen, use something to run through the hose and free up the obstruction.
Vacuum Bag If the vacuum cleaner won't pick up and has no suction the vacuum bag might be full. Clean or replace the bag as recommended by the manufacturer.

Dust Cup AssemblyIf the vacuum cleaner won't pick up and has no suction the dust cup assembly might not be installed tightly, or it might be cracked or broken. The dust cup must seal tightly in order to produce the right amount of suction. If it is cracked or broken, replace it. Most glues and adhesives will not successfully seal the crack.
Blower Wheel If the vacuum cleaner won't pick up and there is no suction, the blower wheel might be jammed or broken. Check the blower wheel to be certain it turns freely. If it doesn't, check to see if there is anything rubbing against it. If not, but it's hard to turn, the motor is most likely the problem.
9_28_2012_11_32_31_am.jpeg9_28_2012_11_32_53_am.jpg

Sep 27, 2012 | Vacuums

1 Answer

Where do i get a replacement power cord for a logitech pure-Fi Anytime M/N00066


I would look for a local shop that specializes in that type of product. Or go to Logitech web site and look up the product number.

May 02, 2011 | Vacuums

1 Answer

Jai un probleme dans la tv daewoo lecran est toujours atteint mais le sens est bien et avec alimentation jai entendu un sens dans la blaque electronic je sais quoi exactemet et merci


Bonjour, Je ne suis pas sûr que le problème est parce que je ne parle pas de français, mais ai une fonction traduit sur mon navigateur. Voici un site Internet que je pense pourrait répondre votre question : s'il n'aide pas, vous pourriez demander à ce site: forum.hardware.fr/.../plasma-daewoo-42nesi-sujet_70005_1.htm

+ HaPlease placent un vote pour moi. Remerciements.

Apr 20, 2011 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...