Question about Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Can you give me a list of Kirby vacs models & the year they were released so that I know how old they are?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 694 Answers

1935 KIRBY Model R*
19?? KIRBY Model 2R
19?? KIRBY Model 3R
19?? KIRBY Model 4R
19?? KIRBY Model C
1939 KIRBY Model 2C
19?? KIRBY Model 3C
19?? KIRBY Model 4C
Model 505 - 1945
Model 508 - 1948
Model 509 - 1949
Model 510 - 1950
Model 511 - 1951
Model 512 - 1952
Model 513 - 1953
Model 514 - 1954
Model 515 - 1955
Model 516 - 1956
Model 517 - 1957
Model 518 - 1958
Model 519 – 1959
Model 560 - 1960
Model 561 - 1961
Model 562 - 1962
1963/64 Sanitronic VII (Sirocco)
1965-67 Dual Sanitronic 50 (Sirocco)
1967-70 Dual Sanitronic 80 (Avocado green)
1967-70 Dual Sanitronic 80 (Avocado green)
1970-73 Classic 1CR (Medium brown, gold bag)
1973-76 Classic Omega 1CB (Dark brown, dark brown pinstriped bag)
1976-79 Classic III 2CB (Candy-apple red, plaid bag)
1979-81 Tradition (Dark blue; intro of paper bag)
1981-84 Heritage (Gray/orange)
1984-89 Heritage II Legend (Charcoal/gray/red)
1989-90 Legend II (Dark rose-pink)
1990-93 Generation 3 (Alabaster)
1993-96 Generation 4 (Medium gray)
1996-99 Generation 5 (Maroon)
1999-01 Generation 6 (Black/Yellow)
2002-05 Kirby Ultimate G
2005-06 Kirby Ultimate G Diamond

http://www.vacuumwizard.com/history-of-kirby-vacuum-cleaners.html

Posted on Sep 12, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 694 Answers

SOURCE: Could you give me a list of Kirby models & the

Generation 5, 1996-99
Generation 6, 1999-01
Ultimate G , 2002-05
Ultimate G Diamond , 2005-06
Sentria, 2006 to present

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I convert a kirby ultimate G from 110V to 220V


You can't. The Kirby draws too many amps for a step down transformer.

Ask Kirby direct if they can convert your head to 220V. click Support - Contact

Kirby Ultimate Vacuum Kirby Models

Nov 10, 2016 | Kirby Vacuums

1 Answer

Kirby Tradition repair manual


Too old. Ask your local vac shop for help.

Oct 21, 2014 | Kirby Vacuums

1 Answer

Kirby Sentria 2 burning smell (not belt)


Actually it can. If the machine has a defect but the good news is that is has a 3 year warranty. Take it to a Kirby authorized repair shop not a vac and sew and they will fix it right up....I am a factory authorized service tech for the Kirby co.

Dec 16, 2013 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Could you give me a list of Kirby models & the years they were released from 1996 so that I will know how old they are?


Generation 5, 1996-99
Generation 6, 1999-01
Ultimate G , 2002-05
Ultimate G Diamond , 2005-06
Sentria, 2006 to present

Sep 12, 2010 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Remove & replace handle release lever on hoover model U6445, s/n 039900015686


From under the vacuum, there is a tab release that you need to pry out the old part. At this point, based on your serial nuimber, your vac is over 10 years old and may also need the base. The bracket is part of the base and not expensive, but the replacement is involved. Once the vac is disassembled, other things may need to be replaced.

Apr 19, 2010 | Vacuums

1 Answer

I have aKirby Diamand series 4 years old


Reason number 1 (not sure why Kirby Co. still has not fixed it) -improperly installed outer bag. You have to push the bag all the way tothe unit so it presses the safety switch that is between exhaust andthe vacuum shell

Reason 2 - defective cord - try wiggling it. Ifyou know how to do it - try removing cord and supplying power directlyto the unit using another cord or wire (ONLY if you know how to workwith electricity.If you get zapped - do not blame me)

Reason 3 - bad power switch (instructions on how to replace it HERE)

Reason 4 (very unlikely) - motor KAPUT

Good Luck
Rocky
:-)

Apr 04, 2009 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Kirby g3 tech drive


so when u pull it back it's like it's not engaged at all? then it maybe the reverse is out....with the fwd soon to follow. remember the vac is 20yrs old; & working that long? it definately served it's purpose.
depending how much money you wanna spend on it buying a new or used trans. plus labor...or just an ebay used unit.

Mar 31, 2009 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Wattage rating for Kirby Ultimate G


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=609384
Wattage rating for Kirby Ultimate G
Posted by avhawaii on May 19, 2008
Does anyone know what the wattage is on a Kirby Ultimate G? I'm moving to the UK and need to know what size transformer to buy! Thanks

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. My suggestion is that you contact the Kirby Co in Cleveland listed below and they will instruct you on the wattage and also what you need for a transformer, or look underneath the vacuum and there should be a sticker stating the amps and maybe the watts, but also the information may be in the owner’s manual or they will mail one out to you, there might be a local Kirby dealer in your area that might have a manual as well. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
Mail To:
Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

May 19, 2008 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

How to install kirby vaccum belts


Take the noozle off of the vac. take out the brush roll and old belt, put the belt over the brush roll and re-instal in the noozle. Turn the big square knob on the front os far as you can, it will lock in that position, then put it back on the vac and lock it down, then turn the knob the other way to release the belt unto the belt pulley.

Feb 20, 2008 | Kirby Generation 3 Bagged Upright Vacuum

Not finding what you are looking for?
Kirby Generation 3 Bagged Upright Vacuum Logo

Related Topics:

892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

JoeVacs

Level 2 Expert

357 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...