Question about Casio Parts Cash Register PC Desktop

1 Answer

Flexion1, Thanks for your reply. When i tried to create the trainee clerk, after a completed transaction, the receipt printed replacing every space with an asterix i.e *. Why is this so? Also unfortunately i think i had entered a wrong code that caused the following to happen. After a transaction e.g 12 x 1.00 flat PLU 001 then subtotal then 20.00 then CA/Amt Tend, it shud give me change of 8.00 and transaction completed but instead, on the display screen, "enter condiment/preparation PLU" appears. Can you resolve this problem for me please. Thanks and hope to hear from you soon.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

I'm pretty sure that is right for training mode (asterisks). It has been a long time since I used it (I prefer to use standard clerks when training so i can demo the daily reports). It is easy to confirm - just print a Z report and see if the transactions are totalling in there. If not, you are in training mode. For your other problem, try turning to program, 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL

Posted on Sep 14, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I print a journal receipt only?

1 turn your key to the position between REG and Off
2 Press rcpt button once
3 turn back to REG

Jul 16, 2013 | Sharp XE-A404 PC Desktop

1 Answer

Hi, I have a Casio TE-4500F and am having problems configuring the clerk interrupt function. If I Iog into the register using one clerk number say 1 - CLK#, as soon as I have pressed a PLU key to start a...

Are you new balancing before you try to log the second clerk on? Make sure you don't have the check tracking selected. You can use interrupt or tables, but not both.
If anyone is looking for a Casio TE-3000, 4000F, or 4500F manual, c-tech can help
TE-3000S operation manual:
TE-4000F, 4500F operation manual:
TE-3000S, 4000F, 4500F programming manual:

Oct 19, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1, Thank you for solving the problem E026 ENTER CONDIMENT/PREPARATION PLU. Please help me with the other; why is it that an amount less than <1.00 is not accepted to make a transaction, it just...

This makes no sense. they are all unrelated problems. Did all of these problems suddenly happen when you changed clerk settings? Try logging on as another clerk. They are in totally different areas of programming. I'm getting some information together for these problems. As for the amount limitation problem, do you get the error when you press the item, or only when you try to press CASH at the end of the sale?

Sep 15, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1, Many thanks for getting back to me. I guess better not to use the trainee instead. The solution did not solve the problem. Still the message E026 ENTER CONDIMENT/PREPARATION PLU appears on the...

Oh right. sorry, the last part of your question was cut off, so I didn't see all of it. It looks like you have accidentally set limitations and preparation status on a PLU.
Firstly, you need to jump out of preparation status. Follow this carefully:

Turn key to PROGRAM mode. (don't worry if error/ beeping) Turn power off at wall. Hold RECEIPT FEED down - keep your finger on it. Turn power on at wall. Wait 5 seconds, then let go of RECEIPT FEED. You should see "FFFFFFFFFF" on display. Press SUBTOTAL and wait for printout. 3 SUBTOTAL (if you see error 8, you need to sign back on) 0 Now press the item button that gave you the error SUBTOTAL
Now go to REG mode and try that PLU (item). If it is doing it on any item or only when you press a payment, let me know

Sep 14, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: SOrry for the time lapse as i had other commitments that i had to attend to that led to my having very little free time. However i would really like to thank you very much for your co-operation...

Try this:
Turn key to program mode 3 SUBTOTAL type clerk number to be set to trainee e.g. 1 07 SUBTOTAL 67 SUBTOTAL 100000 CASH SUBTOTAL
To change the clerk back to a normal clerk, do the same thing, but use 000000 in place of 100000

Sep 04, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1, thanks again for your reply. I have gone through the manual once more and successfully found the one you're specifying. It's Address Code 05 (print control for receipt). Hope to hear from you...

Okay great. We'll try the setting for print control then.
Turn key to program mode 3 SUBTOTAL 0522 SUBTOTAL 40 CASH SUBTOTAL
Turn key back to REG mode and try it. You might have to print two receipts before you see the result.
If it is not what you want, do the same procedure again, but replace the 40 with 1000. Otherwise, to have both, use 1040 in place of the 40.
Let me know how you get on

Aug 17, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Electroboy, thanks for your help. Can you please assist me with the first query with flexion1. I would like to know how to get the print-out on the receipt showing Quantity/Unit q'ty/@ Result rather than...

Sorry, I have just got back in the country. I think you need unit pricing during multiplication. This is held in one of two or three settings, so we can now go through and find it. In the machine feature programming section (just after keyboard programming), you'll find lots of tables with address codes at the top and then in brackets it will have a description. Look for the address code that has the description '(print control for receipt)' next to it. Tell me what the address code number is for that table.

Aug 07, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400 buttons

These three things are all non standard for cash registers and will require codes that I don't have. they can probably be achieved but it will require the machine setting tables from the manual to set the options. My notes are incomplete in this area. I can tell you what to look for if you are able to obtain the dealer manual

Jul 19, 2010 | Casio Parts Cash Register PC Desktop

1 Answer


Without Clerk Function codes 4000 = receipt; 4100 = journal
With Clerk Function codes 4002 = receipt; 4102 = journal

Sep 24, 2008 | Casio Parts Cash Register PC Desktop

1 Answer


after the tranz prints the first receipt do not press the func/enter button, but rather press the clear button on the upper right hand corner. It will not print the second receipt nor will it cancel the transaction.

Jul 18, 2008 | VeriFone TRANZ 380 Transaction System (X2,...

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts


Level 3 Expert

1635 Answers


Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides