Question about Tascam US-144 Sound Card

2 Answers

Computer freezing while using Tascam 122l

I am using a tascam 122l interface with cubase le and everytime i plug the usb cord into my cpu cubase freezes. I even tried switchin computers but i still get the same problem. If you could please help!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I also have been having the same problem no matter what the sofware. Also I bought a gitar rig setup and got the same problm. So I have come to the conclusion that the asio drivers and usb guitar interface running with the music software ie Cubase Live ect are memory hogs and you must upgrade to 2 gigs if possible at least 1.5 gig. I have not done this yet to prove it out but intend to anyway. Probably the slower the cpu ( older) the more ram needed. If you do this and it works for you let me know please.

Posted on Jul 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi

I would perhaps try to reinstall the drivers for the device, and be sure that under audio settings, you have the Tascam set as the default device. Try this and get back to me here if it still gives you problems.

regards
robotek

Posted on May 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound from the monitor or playback


check out where your monitors are receiving their audio from.is it from the tascam or the onboard or audio another interface.first choose an output for your sound,if you using the tascam as an output for your sound connect your monitors to the phones input in front and use the mono mix knob to swap between audio coming from your usb or computer.if you want to hear from your mic or guitar move knob to usb if you want to hear from computer as in playbck move it to computer.

Nov 21, 2008 | Tascam US-144 Sound Card

1 Answer

Low volume on tascam us-122L


tascam US122 I cannot record anymore... green USB light on tascam is flashing all the time very fast... why is that?

Nov 18, 2008 | Tascam US-144 Sound Card

1 Answer

Tascam us 144


make sure you select it as the interface device in cubase.


Thanks,
Nate

Mar 27, 2008 | Tascam DP01 All-In-One Recording Package...

3 Answers

Tascam us 144 sync problems with cubase le


Hey lea,

i have a similar setup (Cubase LE & Tascam 144) and each time i start up Cubase i have to make sure there is no digital input going to the tascam. once cubase is started up but no project loaded i plug in my spdif from my DAT machine and then open my project and all is fine. does that answer part of your question?

i have a different problem though, i'm trying to record my DAT tapes which are recorded at 32khz and cubase doesn't recognize that sample rate properly. it'll record no problem, and play them back fine, but exporting always creates mismatched sample rates in the exported file. sucks big time and i have got no idea on how to fix it either.

Mar 04, 2008 | Tascam US-144 Sound Card

1 Answer

Can't record in stereo


I have a tascam 144 that came with cubase. I am not able to figure out Cubase either. I am a beginner and am trying to record my yamaha electric drum set with it. so far no luck at all.

Feb 25, 2008 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

Burn CDs from Tascam US-122L


The answer is yes, but it may not work as simply as you think. You can't just save your Cubase file / mix and then send it to your recorder. You'll want to render down the song you have to one stereo .wav file and send that to burner as a wav file. (That's the quick way). Another option is to render each file you have seperately so acoustic guitar, bass, vocal, etc are all seperate tracks. So the answer is yes, a .wav file is the format for audio cds. You'll record your seperate tracks and then you'll have to mix down, render, or export them when you are done. In Cubase, use "export".

Feb 07, 2008 | Tascam US-122 USB Audio/MIDI Interface...

3 Answers

Hellp!


Are you hearing the sounds from your speakers on your computer only?...accordianman

Feb 03, 2008 | Tascam US-144 Sound Card

Not finding what you are looking for?
Tascam US-144 Sound Card Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

SmartAviator
SmartAviator

Level 2 Expert

449 Answers

Are you a Tascam Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...