Question about Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

2 Answers

I have a Sony bravia 32" (KLV-32T400A) and have just bought an xbox.. On trying to connect it using the HDMI input an error comes up saying that it's not a supported signal. I also tried plugging my laptop in to the TV, with the same response. The main reason I bought the xbox was so I could use the HDMI channel.. otherwise it's such a waste of money. The TV is advertised as being HD ready, I had no idea there would be a problem with the HDMI input?? On checking the manual it is stated that the TV supports 1080i and 1080p. This is false advertising and had I known the TV did not really support HDMI I would never have bought it. The thought never crossed my mind as Sony Corp has always been a reputable company. I have read another comment on this site stating the same problem! Now i'm stuck with an XBOX having to use the analogue cables for my "HD ready TV"?? Any ideas on what can be done? Michael

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Sony Bravia KLV-32T400A problem in colour became purple. First start ON power the colour is normal. After few second the colour will change to purple colour. What is the problem?

Posted on Aug 30, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

All hd-ready tv's only support max 1080i and not 1080p. The default setting on the Xbox is 1080p, that's why you get that message. There is a way to fix this, just follow the steps below:

Connect TV and X box via HDMI cable with units switched off.

Switch both units on.

  1. Press the right arrow 7 times (Left top jog knob on game controller)

  2. Press "A" button 4 times (Green button)

  3. Press "up" arrow once to set to 1080i

  4. Press "up" arrow once again to set to 720p.

  5. Press "A" to store setting

Posted on Oct 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony 32 inch TV keeps shutting down on BBC 1 ? why


Hi
at HDMI may be some signals are disturbing the tv at BBC1 so please try to change the HDMI setting if the problem goes then ok other wise you may connect your tv box through AV

Feb 14, 2015 | Sony Bravia KLV-32U300A 32 in. HD-Ready...

1 Answer

Hi. Please help. I'm using sony Bravia klv-s3210,


Change the resolution for the picture to match the resolution from the PS3. It probably will never work as VGA does not support HDMI resolution.

Jul 25, 2017 | Televison & Video

1 Answer

Pc in problems no signals sony bravia klv-32 ex300


Plug your video cable from your computer into a known working monitor first to make sure the cable / computer video work.

If this works, unplug all cables from your tv, except the power, and plug in the pc video. Make sure to use the menu to select the correct input (should say "pc" unless you are using hdmi cable, then you select the hdmi input (hdmi1, hdmi2, etc).

Mar 02, 2013 | Televison & Video

1 Answer

Sony bravia klv-32t400a lcd tv


YOU MIGHT HAVE A GOOD CHANCE BY CALLING 1-800-222-7669 IF TED IS STILL EMPLOYED THERE, HE'LL BE ABLE TO GET YOU ON TRACK, GOOD LUCK BOB G.

Feb 03, 2012 | Televison & Video

1 Answer

BRAVIA KLV-37U300A 37 in. LCD TV: I have a HDMI cable attached to my Sony Bravia and...


t con is not working is t con is repairbale or can i get ic becouse here in pakistan is not available.

May 17, 2010 | Sony BRAVIA KLV-37U300A 37 in. LCD TV

2 Answers

I have my xbox 360 connected via hdmi to my yamaha rx-v363 receiver, and the receiver connected to my sony bravia lcd tv via hdmi as well. The xbox picture comes through to the tv fine, but the sound will...


Connect Xbox via HDMI to DTV/IN, Connect HDMI from out to Sony Bavia's HDMI/IN. Connect TV's Optical out to amps DTV/Optical in.

2X HDMI cables and one Optical are required.

Enjoy great sound :)

OH: choose the DTV input then stereo and then dolby 5.1 etc .. cheers

Sep 04, 2009 | Yamaha RX-V363 Receiver

1 Answer

Sony bravia klv-32t400a hdmi input through x-box and p.c gives error reading - unsupported signal! check device output. both are on 1080p using hdmi to hdmi cable v1.3 why no vidio, only audio


The problem is that, according to the specs for that TV, it doesn't support 1080p.
That's a 720p television you've got. (Specs here)
While the specs say that it supports 1080p, the resolution says it supports 1366 x 768, which is only 720p, not 1080p or even 1080i.
You may want to contact Sony for clarification, because their specs for that tv are contradicting each other.

Mar 19, 2009 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

Bravia KLV-S40A10 HDMI input


I agree with your solution and you are correct in that you lose very little quality by using component instead of HDMI. there are A/V receivers that transcode HDMI inputs to component; as far as I know that's the only other option

Dec 25, 2007 | Sony BRAVIA KLV-S40A10 40 in. HD-Ready LCD...

1 Answer

HDMI and other outputs doent work


You may want to try a Manufacture reset. To do this you must first turn the TV off. Press in sequence.. Display-->5-->Vol +-->power on your remote(this sequence must be done fast). This should bring up a service menu. Press the number 8 and then Enter on you remote, The set should go off and on by itself. Now go through your setup and try the input again.

Best regards
Circuitcity

Dec 06, 2007 | Sony BRAVIA KLV-40U100M 40 in. HD-Ready...

Not finding what you are looking for?
Sony BRAVIA KDL-40S2000 40 in. LCD HDTV Logo

937 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...