Question about Projection Televisions

Open Question

Need code for IVO tv with a universal remote.

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: tv codes

Google in "innovage jumbo remote" click images at the top left page.
and a image should pop up with the sheet of codes for all tv types

Posted on Jan 26, 2009

asnowman
  • 788 Answers

SOURCE: i have a living solutions jumbo universal remote and need the code for sony tv

I have found the manual for you to download.

follow this link

http://www.brookstone.com/bs_assets/files/pdf/product/manual/538744.pdf

I hope that I have provided the correct information that will assist you in the resolution of this issue. If you have any questions, please post back with a comment to this thread.
If I have helped you with your question and/or solved the problem, please take just a moment to rate this post. Thank you!

Posted on May 03, 2009

Techjoel
  • 79 Answers

SOURCE: lost remote need code for universal remote control.

These are for a Universal Remote. They might work. If not please add the remote manufactuer and model # to comments.

NEC TV 070 130 134 040 056 007 019 024 004 213

NEC VCR 012 023 043 048 039

Good luck,
Techjoel

Posted on May 11, 2009

  • 1 Answer

SOURCE: codes for NEWSTAR NTR-W81E UNIVERSAL TV REMOTE

go to this web site www.kinmopw.com and make an inquiry. and asap they will send u the codes. just like mine.

Posted on Jun 02, 2009

  • 20 Answers

SOURCE: Need code for TV to program a universal remote

i can't help with codes for universal remote but have you tried repairing the old one ,most of all problems with remote controls can be solved by (a)checking the 433 crystal witch is a little orange or green square about 1/4 inch square this usually has a dry solered joint where movement can be felt with your finger on the solder wilst moving the crysta or(b)the same thing happens to the l.e.d. the little bulb thing that you point at the tv .hpoe this helps

Posted on Jun 13, 2009

pidatoo
  • 118 Answers

SOURCE: need a code for universal remote to tv

Here is a page on universal remote codes. good luck.

http://www.remotecodelist.com/remotes/

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote code for a rca remote for the olevia remote control can you help


Unfortunately Olevia is one of those t.v. brands that is not compatible with many universal remote controls. They make a Universal Learning Remote specifically available from Olevia on their web site that may solve your problem if your universal remote control turns out not to be compatible with your Olevia television.

As for what codes you can try, there are many, and the codes depend on your universal remote control brand. Many times, an RCA code will work for Olevia televisions, so you should try the RCA codes that come with your universal remote first, before trying any of these other codes.

If you have a Dish Network Universal Remote you can use code 506 or 127.

Direct TV remote codes vary by model number on the remote control, but the following codes work with most Direct TV remotes: 506, 127, 11144, 11240, 11331, 11610

Cable Vision use code 506

Charter and Movie Box remotes you can use 1144 or 1178

Comcast codes are 11144, 11240, 11331, 21075, 10159, 10154, and 10088

Cox code is 1610

Brighthouse remote codes are 1610, 1144, 1240, and 1331

Time Warner remote codes are 1610, 1144, 1240, 1331, 432, and 1610

If none of these brands are what you are looking for as far as your Universal Remote Control is concerned, many universal remote controls will work with Olevia televisions if you use the codes found under the RCA, LG, Phillips, and Yamaha in the code listing included with your remote control.

Jul 25, 2009 | Projection Televisions

1 Answer

Need code for sanyo tv from innovage universal remote


http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

click there for the complete list. it indicates that the sanyo tv codes are 0154, 0159

May 07, 2009 | Projection Televisions

4 Answers

Codes


Here are some sites that will have your codes and instructions on how to enter them:

  1. Universal TV Remote Control codes Universal remote control codes for all TV and VCR brands including: at&t, beery systems, bondwell, curtis mathis, dish network, ge, gemini, ...
    www.tvcodes.com/ - 23k - Cached - Similar pages -
  2. Universal Remote Control Codes Universal Remote Control Codes for DVD, VCR, TV and Home Theaters System.
    www.remote-codes.com/ - 7k - Cached - Similar pages -
  3. Philips Magnavox Universal Remote Code Philips Magnavox Universal Remote Code - Instructions on how to program your Philips Magnavox universal remote control.
    www.universal-remote.net/philipsmagnavox.html - 35k - Cached - Similar pages -

Apr 17, 2009 | Projection Televisions

1 Answer

Need code to program a universal remote!


general process for a universal remote control:

  1. push and hold setup 3 seconds
  2. select the device to control (TV DVD etc)
At this moment TV has to be ON (turn tv on by front panel)
3. continue with remote control pushing power button again and again and again SLOWLY
4. when the tv turns off then press enter to save your code.

Apr 14, 2009 | Projection Televisions

1 Answer

Universal Remote Control Code


Each remote manufacturer has their own set of codes. There is not one standard code for your TV. You need to get in touch with the maker of the remote.

Mar 29, 2009 | Vivitek V37655 56" DLP TV

1 Answer

I found a haier tv. problem is no remote. if i bought a universal remote wat r the codes to program the universal remote to the tv or is there a way to select video 1 or video 2 with out it?


I own a One-for-All universal remote (model URC-4220) which works with Haier TVs. The remote comes with a booklet with a list of setup codes.
In order to determine if you can change things manually, you would need to push any buttons on the TV, and see if VIDEO 1 or VIDEO 2 appears on the screen. If nothing like this happens, then you need to buy a universal remote.
I purchased my remote at Walmart, for less than 10 dollars.















Jul 09, 2008 | Projection Televisions

1 Answer

I have a philips tv that i bought without a remote, and then bought a philips universal remote but am stuck on how to tune the channel with the remote. Very frustrating, cannot locate sticker stating brand...


here is a link to the phillips universal remote page that has all the codes for any brand tv including phillips and it will explain how to program the remote try the codes for phillips one of the codes should work.
http://www.universal-remote.net/philipsmagnavox.html

Apr 08, 2008 | Projection Televisions

9 Answers

Philips universal remote codes


For the majority of phillips/magnavox universal remotes: Hold code search button down till red light satys on. Press the tv button and the red light should blink and stay lit. With the tv on, push the power button repeatedly until the tv turns off.(dont push the power button again after the tv turns off or it will go to the next code). Push the mute button to save the setting.

Feb 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...