Question about Maytag SkyBox MBV1976A Beverage Dispenser

1 Answer

My skybox will not dispense. When a button is pushed, all indicator lights flash. All conpartments are full. I have removed all cans from the machine to check for jams in each individual compartment and all are free. Any thoughts?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this exact same problem and it was the door sensor for the flipper where they come out. I used a door alarm contact and it fixed the issue. $5 to fix it and get it up and running again.

Posted on Sep 18, 2010

  • Scot Ender
    Scot Ender Apr 06, 2016

    I tried using your advice, but could not get the control light on board to change after fix? Did not use the "x" wire and switched the other two wires around also, but it did not reset. Is there a sequence to it?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Skybox beverage dispenser. will dispense one can


I had the same problem. Found the cover where the beverages dispense to be rusted and not resetting. After the can dispenses, just push the cover back into position and this should help.

Jun 09, 2009 | Maytag SkyBox MBV1976A Beverage Dispenser

1 Answer

Maytag skybox 1976AAB wont dispence


I had the same problem. The hinge pin on the dispensing door was rusted and this kept the door from closing completly. The door sensor magnet was not making contact with the door sensor and this caused the error. I removed the pin, sanded it down and it before reinstalling. It works fine now.

Apr 05, 2009 | Maytag SkyBox MBV1976A Beverage Dispenser

1 Answer

Skybox won't dispense. Door lights on, but no button lights at al


check the unit out to see if its frozen up. there is also sensors that corrode on them due to condensation. if it is frozen just unplug it and let it thaw out.

Dec 27, 2008 | Maytag SkyBox MBV1976A Beverage Dispenser

1 Answer

Maytag Skybox - Dispense Problem/Lights Flashing


I returned the machine to where I bought it. It not only didn't dispense, it also didn't refrigerate. sorry I don't have an answer for you.

Sep 06, 2008 | Maytag SkyBox MBV1976A Beverage Dispenser

1 Answer

Lights flashing


The flashing lights usually indicate a jam or the flapper door not met which means a drink already dispensed. Just guessing here, but you may have a board problem. I have removed one dispensing drive motor and if I press that button all lights blink until I open the door and close it. Any chance you have a lot of ice buildup in the back? That could be causing a short or even caused connectors to loosen. A new connector board is $22 on partselect.com but that would again only be a guess. Check some of the other problems listed for other possibilities.

Jan 13, 2008 | Maytag SkyBox MBV1976A Beverage Dispenser

2 Answers

Skybox Flashing Lights


I had that problem too, in addition to a backwards cooling fan and the wrong thermostat. I needed to replace a sensor wire in the door, condensation had caused some rust on it.
Al

Aug 26, 2007 | Maytag SkyBox MBV1976A Beverage Dispenser

2 Answers

Maytag Skybox Beverage Dispenser/Refrigerator


TroJo, Try PartSelect.com for Skybox parts. I ordered a part on Monday night and installed it on Wednesday night. The parts are not that hard to find. Appliance repair services can replace your compressor or add freon. Be sure you have plenty of ventilation behind your machine. Jonmon

Mar 23, 2007 | Maytag SkyBox MBV1976A Beverage Dispenser

Not finding what you are looking for?
Maytag SkyBox MBV1976A Beverage Dispenser Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Retail Supplies Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...