Question about Uniden Cordless phone EXS9950

Open Question

Uniden answering machine 900mhz EXA12980

How to set outgoing message

Posted by on

4 Suggested Answers

ABKSeeker
  • 69 Answers

SOURCE: How do I change the outgoing message on my Uniden

Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a
call: “Hello, no one is available to take your call. Please leave a message after the tone.” You can record your own
personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the
announcement.
When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded
greeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting.
To keep this greeting: Do nothing..
To switch to the other greeting: Press 6 while the system is playing the current greeting.
Each time you press 6, the system switches between the pre-recorded and the personal greeting. The last
greeting you hear is used as the current greeting.
Deleting Your Personal Greeting
You can delete your personal greeting from the base. You cannot delete the pre-recorded greeting.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting. Switch to your personal greeting if necessary. (See the previous
section to switch the greeting.)
While the personal greeting is playing, press 4.
The system announces “Greeting has been deleted,” and switches back to the pre-recorded greeting.

Cheers!

Posted on Feb 15, 2010

rizla
  • 1463 Answers

SOURCE: how to set message for answering machine lost directions

hi is this your phone here http://evaluezone.com/dxi986-2.html
also you can get the manual from here as well .
or a search on there web site Uniden | A World Without Wires
may find the right manual .


riz.

Posted on Nov 19, 2007

  • 1 Answer

SOURCE: how to set message for answering machine lost directions

I lost the directions for my NW Bell GHZ answering machine. I would like to change greeting and set the time. How do I do this? It is model 36288.

Posted on Feb 24, 2008

  • 1 Answer

SOURCE: How do I put a message on the answering machine of the uniden 6.0

Press the "envelope" icon at the right-bottom of the keypad. Then press number 8 and it starts the recording.

Posted on May 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the outgoing message on a Uniden Dect 6.0 cordless phone?


Since you didn't specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

Mar 19, 2013 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Uniden phone change message


http://wiki.answers.com/Q/How_do_you_record_an_outgoing_message_on_your_uniden_6.0_DECT_The_instructions_say_to_select_command_8_on_the_menu_How_do_you_get_to_command_8

Mar 17, 2013 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Vtech model cs6219-5 setting number of rings before answering system plays outgoing message


The CS6219 isn't an answering machine. Please consult the documentation for whatever answering machine you have connected to your phone line.

Feb 26, 2012 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I do not have a manual for directions on recording a personal message


For most of the Uniden DECT phones, you set up the outgoing message from the handset. Make sure the answering system is on. For the DECT1480, press Messages/Mute on the handset when the handset is in standby to enter the answering system menu. Then press 5 (or wait until the current message ends). Then press 8 (record new message). Wait for the prompt and then speak your message. When finished, press 8 again. Then listen to the play-back of your message. Press End to save and exit the menu. Alternatively you can scroll through the list of commands and press Menu/Select to enter the sub menu or command.

There are several models of Uniden DECT 6.0 phones. If you have a different phone, you should check your manual. The entire list of Uniden phone manuals is available here: http://www.uniden.com/scat/cordlessphones_mnl . Scroll down to your product and click on the version in your language.

I hope this helps.

Cindy Wells
(most of the Uniden phones that I know have the same set of directions for the answering system outgoing message.)

Jul 07, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I have a uniden dect 6.0 corless phone with anwering machine. I can't figure out how to record a new outgoing message


Specify the model of your answering machine from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to get the manual.

Apr 21, 2011 | Uniden DECT 6.0 Cordless Phone

1 Answer

Can you set a personal outgoing message on a Dect 1560-2 Phone and if yes, how? Thank you!


No, you can't set an outgoing message since the Uniden DECT1560 isn't an answering machine.

Feb 02, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How do we set up the outgoing message on answering machine?


Since you neglected to specify the model of your Uniden DECT 6.0 system I can only suggest your select it from the list beginning hereto download a copy of the manual.

Oct 21, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Need help in setting time and answering machine.Dect2188 Can't see where to set time or how to set outgoing message on this new phone.


You may download a copy of the manual here. The day/time instructions are on pages 9-10. The outgoing message instructions are on page 21.

Aug 25, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Answering machine is not picking up


Some machines have a setting for outgoing message only and will not accept a message in this mode. Check your owners manual to see if this may be the case and set it up to accept messages. In addition, if you have too many old messages on your machine, it will not take anymore until you erase some old ones. Good Luck to you.

Apr 16, 2009 | Uniden Cordless Phone

3 Answers

Uniden telephone answering machine


Replaced my battery for my Uniden 900MHz phone and lost my instruction book..Need to program it again for memory numbers.
How do I do that?

Feb 23, 2008 | Uniden Cordless phone EXS9950

Not finding what you are looking for?
Uniden Cordless phone EXS9950 Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96467 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...