Question about Lexmark E232 Laser Printer

1 Answer

ALL LIGHTS FLASH ON AND OFF ?

ALL LIGHTS FLASH ,CONTINUALLY NO RESPONSE FROM PRINTER?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Absorbers full


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Mar 31, 2011 | Canon Pixma iP4500 InkJet Printer

1 Answer

I have an hp c5280. the machine will not turn off and the l panel light continually flash. I tried unplugging all cords and replugging and I still cannot turn it off, lights still flash, and cannot print.


Hello Friend, Please check on the power switch connector it might have pulled out from its place. So gently open it, and check on the switch, you will find a solution from there.

Mar 22, 2011 | HP Photosmart C5280 Printer

1 Answer

The red and green lights are flashing continously and it won print


The lights continually flashing indicate a paper jam or the printer being out of ink. Check/clear any paper jam and verify the ink cartidge is set correctly.

Mar 05, 2011 | Epson Stylus C48 InkJet Printer

1 Answer

Doesn't print - carriage makes a clicking noise and power/paper lights flash


To confirm once again remove off the printer, reinstall the software, then connect the printer to be installed once again.
Now repeat the test print on the printer, if there is no response, check for the motor mechanism for jamming. Also see that the ink cartridge is moving well if not release any jamming possible from any objects.
If there is not response even after this the servo controller/ processor of the printer is faulty.
Possible error in the main board

Sep 14, 2010 | HP DeskJet 5550 InkJet Printer

1 Answer

Red lights flash alternately with no printing response


Hi Try to do a Powerflee

steps:

unplug all the cables including the power cable.

press and hold the power button ( On/Off) for 30 seconds

plug back all the cables and then try printing

May 07, 2010 | Epson Stylus Photo R200 InkJet Printer

1 Answer

All four lights flash continually on Brother 2070n printer


If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by
lighting up all the LEDs as below.
c5ae79f.jpg If you see the service call indication, turn off the power switch, wait a few seconds, and then turn it
back on and try to print again.
If you cannot clear the error and see the same service call indication after turning the printer back on, call
your dealer or a Brother authorized service representative.

Aug 04, 2009 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Lexmark E232 Laser Printer Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...