Question about Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

1 Answer

LTV-32w1: Vertical scrolling on screen. Already replaced power supply and new power supply died. Saw reference to T-Con board. Can a bad T-Con board blow the power supplies or does it just send an auto shut down signal to the power supply? I now have two power supplies which may or may not be bad and suspecting that T-Con board.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Rolling or sync bars can be caused by bad caps in the tuner. I also had a brown film all over my board. Clean with alcohol and repace the 2.2/50 caps in the tuner. l

Posted on Mar 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV comes on with vertical lines rolling up on the screen with picture. The picture also freezes and then goes to the blue screen for a while and then comes back on perfect. Is there a problem with the...


No,the T-CON board it is dying and the causes to causes this problems.That the board sit at the bottom in the middle of the tv LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON board for the replacement.

Aug 03, 2011 | Westinghouse LTV-20V2SL 20.1 in. ED-Ready...

2 Answers

I need to replace the power supply on my Westinhouse LTV-32W1 flat panel TV. What is the Part number and where can i buy it?


Go to Ebay and type in the model number in the search and scroll down to reveal the availibility and price. Shopjimmy.com may have one too. Be sure to match up the number from your board.

Jun 09, 2011 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

1 Answer

Sound but no picture


It can be the backlight inverter board or it is not getting 24vdc from the power supply, you need to check and see if you do have 24vdc at the fuse on the inverter board as shown in the pictures.
Parts: http://www.shopjimmy.com/catalogsearch/result/?q=westinghouse+LTV-32W1
http://s807.photobucket.com/albums/yy352/budm/LTV-32W3HD/
http://s807.photobucket.com/albums/yy352/budm/Westinghouse%20LTV-32W1/

May 11, 2010 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

2 Answers

Westinghouse LTV-32w1 32 in. HDTV-Ready LCD Television I have a 32" tv Westinghouse, it was on went I hear a sharp pop like glass breaking, I unplug it for a willy plug it back in and nothing happen what...


Ur power supply board is dead.Take ur tv aparts,replaced the power supply board.Ur tv will get ur power back an the tv will work again.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 06, 2010 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

2 Answers

Tv turns off and dont want to turn on again


check outlet power by connect other device, check power cord if OK check then unplug tv and open the back cover and check power filter fuse power filter is the one that you hooked power cord if OK check power supply board fuses if OK check the power supply board for bad blown components .good luck

Apr 29, 2010 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

1 Answer

Vertical colour bars


The problem is in the LCD controller board is overheated because the power supply unit is at the bottomof the TV and the heat rises upward to the vent on the top of the TV. You can verify that is hest problrm by running TV with the back removed and have a small fan blowing on the top secdtion of the TV where the LCD controller is. This how I fixed my scrambled picture after warm up (I added heat sinks to the IC on the LCD controller board) : http://s807.photobucket.com/albums/yy352/budm/LTV-32W3HD/
You can try it if the board was not badly damaged already by the heat. My has been running great for over a month now.

Feb 04, 2010 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

Not finding what you are looking for?
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...