Konica minolta magicolour 2530dl

1. Touch Menu.
2. Touch [Counter].
3. Touch [Display Keypad].
4. Press the following keys in this order.; Stop -> 0 -> 0 -> Stop -> 0 -> 1
5. Enter the CE password and touch [END]. (IF required)
6. Counter
7. Life
8. Transfer Roller Clear

The transfer roller is the sponge looking roller at ea. Replacing the transfer belt mite also be a good idea.ch end of the roller should be clips allowing it to be removed

Check the transfer belt might need to be replaced.

Thank you for your kind reply.
I'm not going by the readout - but by the fact that bits of paper get stuck under one or two of the final feed rocker/rollers,,,, and are a bu@@er to get out.
Kinolta Customer Service - AND MANAGEMENT - are aware of just how badly designed this paper feed system is, but will do nothing about it.
I have had to virtually strip this piece of carp down, just to give me a little more access,,,, even then, its more than a struggle.
Thanks again.

Transfer roller issue. the sponge looking roller across from the transfer belt.

sounds like a lable has gotten stuck in the fixing unit, you may need a tech to remove it, do not use any sharp tools to remove it ,this could cause damage to your roller,
good luck, tinyman

Part Number 8314131-0370 2nd Transfer Roller This part should last approx 120,000 copies
Follow this link - Approx $25.00 http://printer.konicaminolta.net/service/Parts_Information/mc2300/parts/mc2300_parts_list_by_part_number.asp

the lazer unit needs recharging

the reset is done via a 'first use fuse' in the drum unit.
check the contacts or put in a new one.

touch screen is about 128 eur, transfer roller and tbu you can reset