Question about Coffee Grinders

1 Answer

Manual meat grinder no longer provides suction

I have a manual meat grinder made by Rival (series 358) whose parts are all operational except the rubber vacuum base no longer maintains suction. This rubberized base is intact but it appears to be relatively flat. Any suggestions? I have looked for a replacement base but no luck.

LW

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I know you posted this several years ago but found a solution which might help you or others. I recently bought a used Rival grinder and the base would not stick. I tried to take off the black rubber base to look underneath and turned it about 45 degrees but it would not come off so I turned it back and pressed it back into place on the bottom. Just shifting and replacing the black base fixed it! Also make sure the base is all the way around the bottom and try to place a little water on the base too.

Posted on Mar 11, 2014

2 Suggested Answers

  • 176 Answers

SOURCE: Two of the rubber teeth on the spin wheel from the

Hi, replacing the blade assm. will cost you more then a new one.

Posted on Jul 26, 2010

  • 833 Answers

SOURCE: Looking for users manual

You'll find it here: http://www.lapavoni.com/

Posted on Dec 03, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a free manuel plus recipes for my deni 5500 soft serve ice cream maker


On the web:
Search Results

    DENI 5530 INSTRUCTIONS MANUAL Pdf Download.

    www.manualslib.com > ... > Deni Manuals > Frozen Dessert Maker > 5530
    Deni - Keystone Manufacturing Co, Inc. Ice Cream Maker Instruction Manual. ...Freezing the Speedee Freeze ® Canister Deni Soft Serve Ice Cream Maker. ... placing in the Scoop Factory, and freezing canister is as close to -20°F as possible.

Oct 02, 2015 | Deni 3400 550w Meat/food Grinder

1 Answer

Where can I get a user manual?


You can try a Google search for Krups 402 manual but you may have to contact Krups directly to determine availability and source.

Jul 05, 2015 | Krups Model 402 The Butcher Shop Meat/food...

1 Answer

What type of replacement switch can I use for a 4322 grinder.


I seem to find only meat grinders with that number not coffee grinders . What do you HAVE make ,model . try the manufacturer most have a website anymore

May 14, 2015 | Coffee Grinders

1 Answer

Need an instruction manual for a krups 402-70 meat grinder


Go to KRUPS.COM online, and search their website for a manual for your product. If one is NOT listed, call KRUPS on their 800 number and explain your problem and how to get the manual. OR, you can contact a customer service representative by email, and they should respond within a couple days and let you know how to proceed.

Apr 10, 2014 | Krups Model 402 The Butcher Shop Meat/food...

1 Answer

Need operating & maintenance manual for brevetti gaggia mdf burr grinder.


Hello, your instruction manual can be found on this link by clicking or copy and pasteing it to your browser http://www.gaggia.com/dam/bo/allegati/files/31_mdf.pdf if you are unable to obtain these instructions by copy and pasteing to your browser please message me back and I will provide my email so that I may send you them directly.
Thank you
Rick

Nov 08, 2011 | Gaggia MDF Electric Burr Grinder

1 Answer

How to open super jolly's base plate


  1. Disassemble the plastic container and douser cover
  2. Disassemble uper burr holder and take out 3 springs too.
  3. Disassemble the legs of grinder and bottom plate
  4. Disassemble the wires and swich(before disassembling be sure that you marked each wire)
  5. Unscrew the bottom plate of electro motor (2 screws you live just released)
  6. Take one METRIC BOLT M8 30 mm length and screw it in middle of bottom plate(it will pull the plate out slowly)
  7. Block the lower burr holder and unscrew the bolt in it. Instead that bolt you put one longer bolt (3-4cm longer)
  8. You stabilize the base of grinder and start to hit with hammer the bolt, each hitting will pull it bit down, you should move it 12 mm lower to get it out.
  9. Once when you have it out you can also change the bearings at your grinder not only revising the lower plate.
PS: Carefully with the pin in axis, it comes out easy, also it goes through bearing with rotor together. - I think i prescribed all stages of demoting the grinder motor(except windings) if you go for mounting with this manual only back ways i think you will succeed to put it back in function.

Jan 05, 2011 | Mazzer Coffee-grinder SUPER JOLLY Electric

1 Answer

How do you get to the bearings


  1. Disassemble the plastic container and douser cover
  2. Disassemble uper burr holder and take out 3 springs too.
  3. Disassemble the legs of grinder and bottom plate
  4. Disassemble the wires and swich(before disassembling be sure that you marked each wire)
  5. Unscrew the bottom plate of electro motor (2 screws you live just released)
  6. Take one METRIC BOLT M8 30 mm length and screw it in middle of bottom plate(it will pull the plate out slowly)
  7. Block the lower burr holder and unscrew the bolt in it. Instead that bolt you put one longer bolt (3-4cm longer)
  8. You stabilize the base of grinder and start to hit with hammer the bolt, each hitting will pull it bit down, you should move it 12 mm lower to get it out.
  9. Once when you have it out you can also change the bearings at your grinder not only revising the lower plate.
PS: Carefully with the pin in axis, it comes out easy, also it goes through bearing with rotor together. - I think i prescribed all stages of demoting the grinder motor(except windings) if you go for mounting with this manual only back ways i think you will succeed to put it back in function.

Jul 08, 2009 | Mazzer Coffee-grinder SUPER JOLLY Electric

2 Answers

Nemox Lux Burr Grinder


There are a series of gears between the motor and the shaft. Replacement parts are avaialble ad cafeparts.com under ascaso ibertal grinders. You will need to take the grinder apart to find the problem.

Dec 16, 2007 | Nemox X79751250 Electric Burr Grinder

1 Answer

Looking for users manual


You'll find it here: http://www.lapavoni.com/

Nov 21, 2007 | La Pavoni Automatic Burr Coffee Grinder -...

Not finding what you are looking for?
Coffee Grinders Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Grinders Experts

Tony R.
Tony R.

Level 2 Expert

24 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Ray Murphy

Level 2 Expert

67 Answers

Are you a Coffee Grinder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...