Question about Robot Coupe R2U Ultra Food Processor

1 Answer

The robot coupe will stop working periodically during use. The reset button on the bottom pops out after it has been used for a short while. I run a kitchen and it can be very frustrating trying to get it to operate again. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 193 Answers

It is overheating, probably because it is being overworked. Some common problems are overloading the bowl, or forcing too much food into the hopper on top. Once it overheats, it will kick out again rather quickly the next time unless the motor has time to cool. If you are shredding cheese, slow down on the amount of cheese forced into the blade. If you are trying to mix heavy dough you are probably overloading the bowl as well. This machine can't handle over a pound of pizza dough without overheating. The reset button is there to keep from burning the motor out. If you continue to reset and force feed the machine, it will burn the motor out. Good luck, hope this helps.

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a robot chef food processor it says type RC3 on the bottom the clear plastic top about 20cm dia with the funnel has broken where can I get a replacement part please?


To the person wanting a funnel for her robot chef just bought an old processor on eBay to replace the bowl I've got the lid if you still need it

Jun 26, 2010 | Robot Coupe CL50 Food Processor

1 Answer

I have a Robot Coupe R2 food processor that quite


It just a long shaft phillips screwdriver. The screws are located under the foot pads. They just pull out and then there are the four screws.

Dec 29, 2009 | Robot Coupe R2U Ultra Food Processor

1 Answer

Looking for spare parts for a Robot Coupe R301 Ultra Food Process


Robot-Coupe USA.com should be able to sell you anything needed

Jul 09, 2009 | Robot Coupe Food Processors

1 Answer

How do i seperate the housing on a robot coupe processor


There are 4 rubber shoes on the bottom of the white or gray base. Twist & pull these out. With a TORX long shank screwdriver (nothing else works, trust me) there is a screw way down in each hole. After removing the screws a gentle but firm bump should loosen the base. If you ever need to replace the motor, on the top around the drive shaft you will see three round plugs/disks, remove them by prying up with a pocket knife (works best) this will give you access to the three motor bolts.

Feb 20, 2009 | Food Processors

1 Answer

Robo coupe CL52D would not turn on


There is a reed swich (safety switch) located on the top where the lid comes down. A reed switch works with a magnet. If the magnet is missing or the reed swictch is bad, no power will be allowed to the motor. Send me your e-mail & I will look up the part # in my Robot-Coupe manual. capt_rick1912@yahoo.com

Dec 16, 2008 | Robot Coupe CL52D Food Processor

1 Answer

How do I assemble the Robot Coupe R 2 Ultra


Cindy,
Send me your e-mail & I will send you back an exploded view of your Robot-Coupe. It will give all the info needed. capt_rick1912@yahoo.com

Nov 02, 2007 | Robot Coupe R2U Ultra Food Processor

1 Answer

Robot Coupe clicks, runs 5 seconds, stops for 30 seconds, clicks, runs 5 seconds...


The clicking noise is an internal circuit breaker or motor protector. These things are not made to be bogged down or overfed. The motor is heating up & tripping the overload, after cooloing it resets. Time to buy a new one or get the motor replaced ($600-$800)

Oct 29, 2007 | Robot Coupe R100 10 Cups Food Processor

Not finding what you are looking for?
Robot Coupe R2U Ultra Food Processor Logo

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Robot Coupe Food Processors Experts

eyecam

Level 2 Expert

87 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Robot Coupe Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...