Question about Televison & Video

1 Answer

Any help on this... My pioneer pro-1150hd will not display the picture...and the red front panel light flashes 8 times and continues to repeat itself. Thanks for the help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

I suspect that the 8 blink pattern is a fan error. If you feel comfortable with trying to do the repair yourself. You would remove the back of the set, look for one or more

small fans, use a vacuum and a lint free cloth to clean the fans blades and inside

rim of fan housing. I found in some models that dust buildup will block the signal

that the fan sends to the microprocessor in the power supply, if the microprocessor

does not detect the fan signal then it shuts the set down to protect from over heating.

Sometimes this type problem is intermittent as you described.



There are other possibilities , but would require an experience technician , with a service manual to follow flow charts to determine which board may be at fault.


Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find activation code for pioneer


My pioneer 5020FD Kuro tv. when I plug power to the unit, a blue light blinks 8 times pause 2 sec. and blink 8 times repeating this and if i press power button it clicks red light and makes a clicking sound and goes back to the blue light blinking again, it did this once before and the picture came on fine until i turned it off and now it just blink the blue code.

Dec 10, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

Can i use a universal remote to reset trap switch on pioneer pro 1150hd 50in. tv


To get into service mode you need the genuine remote control, A universal one will not work.

Mar 06, 2012 | Pioneer Televison & Video

1 Answer

Problem with Pioneer PDP-6010FD


Hello
The set can be set right by repair. You must have through knoledge in electronics to do work with set. especially, plasma displays will have very complicated circuits. It Sustain-Boards suld be trouble shooted.

Feb 21, 2012 | Pioneer PDP-6010FD 60 in. Plasma HDTV

1 Answer

Hi My name is Dieter and I have a Pioneer Elite Pro-610-hd which keeps loosing the picture and sound.


The tv "LAMP" LED light indication front of the screen panel flashes?When was the last time u replaced the tv projection lamp on this tv?If the last time u replaced the projection lamp was like 1/12 or 2 years ago?The tv been on and used like 4 or 5 hours a day?The tv projection lamp life are over.Require a new projection lamp.

Sep 19, 2010 | Pioneer PRO-610 58" Rear Projection...

1 Answer

Turn tv on,picture good for 4 seconds,then green curved line like a rainbow all green,then 4 green sequence flashes,picture goes out theN volume continues for 2 seconds then out front red power light then...


This is a set with bad picture tubes-not available except on rebuild basis.

Are you seeing bright green screen and then set shuts off?

Let me know so I can help--8 blinks is AKB error.

SD TECH

Sep 15, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Pioneer Elite. Loud popping sound and picture disappeared


Power supply board is dead.The board where the power a/c cord plug into it.Replace the power supply board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 30, 2010 | Pioneer Elite PRO-1140HD 50 in. Plasma...

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

2 Answers

Pioneer plasma no picture with blinking red light


this requires a replacement of the power supply board. This is per Pioneer tech support whom resolved my issue when I called. Hope this helps!

Oct 28, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...