Question about Homelite Consumer Products 9.0 Amp, 14 In. Chainsaw

Open Question

What is the fuel mix for a homelite 330 chainsaw? The model # is UT-10609.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dontbother10
  • 2220 Answers

SOURCE: I have a 1979 Homelite XL Chainsaw model # UT

32:1 according to this.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/57a3b86d6acae4e188256c260048b728?OpenDocument

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Posted on Apr 14, 2010

Ad
  • 4088 Answers

SOURCE: Fuel Ratio

40:1 is about right. Be sure to use modern synthetic oils made for saws and premix thoroughly before adding to the saw.

Posted on May 04, 2010

  • 9 Answers

SOURCE: need to know the fuel and oil mix on a homelite

The fuel, oil mix for homelite chinsaws is 32:1. Hope this helps.

Posted on Sep 27, 2010

hunter19_46m
  • 7482 Answers

SOURCE: need to know;

Hi gandp1993..

50 to One...oil to gas ratio 1 pint of 2 cycle oil to 6 gallons of gasoline.
Spark plug setting... .28 - .32
Please take time to rate me

Posted on Sep 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What year is my saw It,s a 330 homelite ut#10609 SER 5e2660301


Homelite Serial numbers 5e2660301 was manufactured on September, 23rd1983

Here is the serial number breakdown:

5 = Assembly line that this was built on (could also be represented by a letter)
e = The year of final assembly (See Letter Codes) E=1983 in your case
266 = These three digits 266 equals the day of the year (Julian calendar) September, 23rd (1983 was not a leap year)
0301 = These digits are the count of units produced that day 0301 = 0301th unit

----------------------------------------------------------------------------------------
Letter Codes C-1981 D-1982 E-1983 F-1984 G-1985 H-1986 I-1987 J-1988 K-1989 L-1990 M-1991 N-1992 O-1993 P-1994 Q-1995 R-1996 S-1997 T-1998 U-1999 V-2000 W-2001 X-2002 Y-2003 Z-2004 Previous Numeric Codes: 2-1972 3-1973 4-1974 5-1975 6-1976 7-1977 8-1978 9-1379 0-1980 1-1981

Feb 20, 2016 | Homelite Garden

1 Answer

What is the fuel mix for a homelite 330 chainsaw?


Two pints of oil to 2 1/2 gallons of gas...or 1 pint to 1.3 gallons of gas.

Jul 30, 2014 | Homelite Garden

1 Answer

Need to know; oil mixture spark plug setting for a homelite textron 330, ser.#3D2360270, Ut#10609


Hi gandp1993..

50 to One...oil to gas ratio 1 pint of 2 cycle oil to 6 gallons of gasoline.
Spark plug setting... .28 - .32
Please take time to rate me

Sep 22, 2011 | Garden

1 Answer

I would like to know where I can buy or order an inlet manifold boot for Homelite 330 Chainsaw. I am having difficulty finding this part.


hi photobil

pauly46 here

here is web site for parts

http://www.odref.com/homelite/chainsaw/ut-10540.pdf
go to page 9

part ref # 26 number 93838b boot connector

save a copy of this file

here is another web site
http://store.chainsawr.com/collections/homelite-1?page=11

he has had them but o/s at present but order 1 anyway

check out www.chainsawr.com , go to parts by brand homelite ,

cheers hope it helps

pauly46

May 29, 2011 | Homelite Zama Rb3 Carb Kit 330 Chainsaw...

1 Answer

Need gas/oil mix for Homelite 330 10604A, HJ


To the best of my recollection the 330 is an older model saw and should be running about a 16:1 ratio. 8oz. of oil to 1 gallon of fuel. Hope this helps.

Note: You're always better being a bit richer (lower ratio) than you are leaner (higher ratio).

Feb 20, 2011 | Homelite Gas, 20 In. Bar, 46 CC, Chain...

1 Answer

Homelite ut 10695 spark plug gap, gas oil ratio?


Gap the plug at 0.020", and the fuel to oil ratio is 50:1. Be sure to use a modern synthetic saw oil, fresh fuel, and mix in it's own container (don't make up more than a gallon at a time unless your business is sawing). Be sure to shake the container thoroughly each time just before adding fuel mix to the tank to prevent oil starvation. Hope this helps!

Nov 04, 2010 | Homelite Consumer Products 9.0 Amp, 14 In....

1 Answer

Need to know the fuel and oil mix on a homelite 330 chainsaw


The fuel, oil mix for homelite chinsaws is 32:1. Hope this helps.

Sep 26, 2010 | Homelite ZR10926 16" Chain Saw

1 Answer

Fuel Ratio


40:1 is about right. Be sure to use modern synthetic oils made for saws and premix thoroughly before adding to the saw.

May 04, 2010 | Homelite ZR10926 16" Chain Saw

1 Answer

I have a 1979 Homelite XL Chainsaw model # UT 10045C Serial # 3E1930093. What is the fuel mix ratio for this saw?


32:1 according to this.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/57a3b86d6acae4e188256c260048b728?OpenDocument

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Apr 14, 2010 | Homelite Garden

Not finding what you are looking for?
Homelite Consumer Products 9.0 Amp, 14 In. Chainsaw Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homelite Garden Experts

roeb

Level 3 Expert

641 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Homelite Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...