Question about Epic 400 Mx Treadmill

Open Question

My epic 400 mx treadmill won't start, the reset button is on, the key is in place, but when i press the start button nothing happens

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: the digital readings on the console of our Epic

Most likely the console is faulty. If the speed and incline buttons work and the numerical display is incomplete the console is at fault.

Posted on Jan 15, 2011

ercupa190
  • 12223 Answers

SOURCE: epic 400 mx treadmill owners manuel

Dear Sir:
I will help you right now.
Please go to the next web for free:
download for free.
http://fitness.manulsonline.com
THIS ANOTHER WEB, BUT YOU MUST PAID: www. fitnessrepairparts.com

If you need further assistance, please reach me, sincerely. God bless you.
E.CUADRA MANAGUA, NICARAGUA. C.A.

Posted on Oct 21, 2011

ercupa190
  • 12223 Answers

SOURCE: when I turn the power

Dear Sir:

I will try to help you, please be patience and carefully, use basic tools+Dvom.

Check this videos.

http://www.youtube.com/watch?v=E-q-uS4t6so

http://www.youtube.com/watch?v=dJU7T1AFRoc&feature=related
http://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=related

http://www.youtube.com/watch?v=AFuRo2zHpCg&feature=related

Some consoles require batteries. Check to see if this is the problem. If the console does not use batteries, move on to Step 2.

    • 2

Remove the key from the console.

    • 3

Unplug the power cord.

    • 4

Remove the screws from the console hood and remove the hood.

    • 5

Turn the pulley until the reed switch and magnet are aligned with a 1/8-inch gap between reed switch and pulley.

    • 6

Replace the hood.

    • 7

Plug in the power cord.

    • 8

Reinsert the key into the console.

    • 9

Run the treadmill to check for a correct speed reading. This may take a few minutes.
With this you will fix it.

If you need further assistance, please reach me, sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A

Posted on Oct 24, 2011

ercupa190
  • 12223 Answers

SOURCE: How do you get the cover off of the Epic 425 Mx

Dear Sir.

I will try to help you:

http://www.youtube.com/watch?v=zXeHMWTcLUY&feature=related
http://www.youtube.com/watch?v=H_ieEByRp34&feature=relmfu
http://www.youtube.com/watch?v=JhXR2BxOwWM&feature=related
http://www.youtube.com/watch?v=CuMjcPLYehw&feature=related

With this you will fix it.
sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA C.A.

Posted on Oct 24, 2011

ercupa190
  • 12223 Answers

SOURCE: my epic 425 mx treadmill belt hesitates and rubs

Dear Sir:

I will try to help you.

http://www.youtube.com/watch?v=CuMjcPLYehw&feature=related
http://www.youtube.com/watch?v=E5aWisfhT3Q&feature=related
http://www.youtube.com/watch?v=38w4PkiWIBY&feature=related
http://www.youtube.com/watch?NR=1&v=KiEZDNe0F8Q
http://www.youtube.com/watch?v=HmVt-SHSYAI&feature=related

With this you will fix it.

If you need further assistance, please reach me.sincerely. God bless you

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Posted on Oct 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've got an EPIC 400 MX Treadmill and I can't get the speed to start, incline works, is it the keypad?


If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Nov 11, 2016 | Epic Exercise & Fitness

1 Answer

Does anybody know what a bar that looks like its loading on the bottom of the screen ans nothing works means on my x7i?


Reset the machine with the small button to the side of the power button, and disconnect the machine power cord by 2 minute and toucht the small swithc with the eraser pencil make click.
Now try again. However if the problem persist try this:
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

God bless you

Nov 29, 2013 | Nordic Track Incline Trainer X7i...

1 Answer

Can you advise please


reset the machine make this: God bless you
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Nov 28, 2013 | Precor 935 Premium Series Treadmill

1 Answer

My treadmill wont re-boot


follow this steps and fix it. God bless you
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Nov 11, 2013 | Epic A30T Treadmill

1 Answer

My facebook, firefox. youtube all are not loading correctly. the script is on the left side of page with nothing in middle. Has little links and blocks all crowded to gether and everything is messed up....


RESET THE machine, follow this steps and fix it. God bless you
    Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
      • 3
    Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
      • 4
    Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
      • 2
    Locate the reset switch on the underside of the treadmill console. Usually the button

    Oct 24, 2013 | Exercise & Fitness

    1 Answer

    Epic 450mx console lights up but nothing works not even the fan, worked fine yesterday


    1) Adjust the REED switch,clean, and tigh the connector wires.see the diagram attached.
    2) See inside for any fuse blown adn replace, or c.breaker reset

    3) Reset the machine. Tight any connector, and wires looses, or breaker use the DVOM , see the diagram
    God bless you
    5_9_2012_10_27_15_am.gif5_9_2012_10_27_42_am.gif5_9_2012_10_28_07_am.gif

    May 08, 2012 | Epic 450 Mx Treadmill

    1 Answer

    I left the red key in epic view 550 for 1 full day, next day when discovered now treadmill will not start, no lights, no noise, nothing!! Help


    Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch to the reset position.

    Apr 30, 2010 | Epic View 550 Treadmill

    1 Answer

    The treadmill does not incline. Motor runs when the button is pushed but no movement.


    Try Re-Calibrating 1st, here's how.
    With the Treadmill off, press and HOLD the SPEED UP & STOP
    keys, while holding the speed up & stop keys insert the Safety key (Magnet) release the speed up & stop keys. now press and release the stop key. now press the "incline up key" let the treadmill go to max incline,after it stops press and hold the "incline down key" let it go to minimum (completely lowered) you should now be re-calibrated.

    Dec 23, 2009 | Epic 425 Mx Treadmill EPTL88105 !

    Not finding what you are looking for?
    Epic 400 Mx Treadmill Logo

    Related Topics:

    351 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Epic Exercise & Fitness Experts

    Matt Olenzek
    Matt Olenzek

    Level 2 Expert

    293 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    L Pfaff
    L Pfaff

    Level 3 Expert

    11573 Answers

    Are you an Epic Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...