Question about Ovens

Open Question

How do I change the door on a Teka oven HTD 888

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem start when i turn Oven only on teka, then the fuses blown up. I can still use grill but whwn I turn to oven fuses go blow up again.


Hi! It seems it is not the heating element! It seems to be before that. Either a short circuit delivering to much current thus causing the blow. I would check the corresponding cable all the way to the circuit and the circuit elements corresponding to the oven element. The grill and oven elements being "independent" explains why grill still works. (A short circuit seems quite possible to me!)

Dec 06, 2014 | Ovens

1 Answer

Teka ha 830 oven timer will not reset after power cut


I have a Teka HA830 oven I held the buttons down but it never resets. Would like to know if its possible to change the computer board, and where can i purchase it online?..

Jan 29, 2013 | Ovens

1 Answer

Instruction manual needed for teka oven profesional 518


http://uk.search.yahoo.com/r/_ylt=A7x9QV_W9RdP1TwAyj5LBQx.;_ylu=X3oDMTBybWpoN25zBHNlYwNzcgRwb3MDMgRjb2xvA2lyZAR2dGlkAw--/SIG=12dh9vsl5/EXP=1326999126/**http%3a//kitchen.manualsonline.com/manuals/device/oven.html

Jan 19, 2012 | Ovens

1 Answer

I have a Teka oven HI-595 that shows power, fan works and grill works but oven won't heat up. What should I do?


If the fan is working o/k, then it is probably the oven element that is faulty, usually located at the rear of the oven compartment behind a removeable cov er.

Oct 21, 2010 | Ovens

1 Answer

Oven overheating ,even on very low degrees. Its a Teka


In most cases of ovens overheating, it is usually due to the oven thermostat being faulty.
The usual solution is to replace the thermostat.

Mar 10, 2010 | Ovens

1 Answer

Teka h e 500 oven wont heat up....


If the fan is working o/k then the oven element is probably faulty, this should be at the rear of the oven behind a removeabkle cover.
Make sure you have the control set to grill , for grilling

Dec 03, 2009 | Ovens

1 Answer

Teka Model HC-595 - oven does not heat, fan working ok grill working ok


Sounds like the fan element has blown. I think access is from inside the oven at the back BUT the screws to undo the element are accessed by removing the rear cover. You will have to take the oven out of the cabinet to where is is fitted to do this and from memory there is an earth tag which is fixed to one of these screws

Oct 19, 2009 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...