Question about Toshiba TEC B-452 Thermal Label Printer
Check that you are not in direct thermal mode and if the roll is correctly placed on the supports. If the roll is not meant for this printer then you have this error
Posted on Dec 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to set the ribbon type to be "non-transmissive" for black transfer film.
To set the ribbon type, turn the printer off. Then press and hold the "feed" and "pause" buttons while turning on the power. The printer will now be in diagnostic mode - you can page through the menus until it says "ribbon type"
Pick the correct type and press the "pause" key to save the value. Then turn off the printer and turn it on again normally. The ribbon error goes away.
Posted on Mar 21, 2009
Tips for a great answer:
Apr 27, 2014 | Toshiba TEC B-472 Thermal Label Printer
Jan 25, 2011 | Toshiba TEC B-472 Thermal Label Printer
Oct 22, 2010 | Toshiba TEC B-452 Thermal Label Printer
Oct 08, 2010 | Toshiba TEC B-452 Thermal Label Printer
Aug 12, 2010 | Toshiba TEC B-SX4 Thermal Label Printer
Aug 10, 2010 | Toshiba TEC B-882 Thermal Label Printer
Apr 20, 2009 | Toshiba TEC B-452 Thermal Label Printer
Mar 19, 2009 | Toshiba TEC B-572 Printer
Mar 02, 2009 | Toshiba TEC BSX5 Thermal Label Printer
554 people viewed this question
Usually answered in minutes!