Question about Maytag Neptune MDE7500AY Electric Dryer

1 Answer

Maytag MDE7500ay dryer with LCD display. The screen is lit up but the display is blank. No words. Unplugged and plugged back in.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 17,129 Answers

It is possible that the electronics section has encountered the following.:
1. Failure of Power to the main board.check the power supply.
2. If P.S. is OK.then Failure of the microcontroller / display drive.
3. If OK then the cord/connection of the display.
If mP is a suspect then the main board can be faulty.

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello all, My MDE7500AYW Maytag Neptune Dryer was working today and just quit. It is plugged in and the drum light works when the door is open, close the door and nothing. No LCD display, no...


looking at schematics looks like you main control board is the faulty part. you have done a very good job of tracing the voltages from the source. been that all voltages are present and door switch is good the part left is the control board. here is the part# 33002886. you can find it at sears website or service center.

good luck to you.

Feb 15, 2011 | Maytag Neptune MDE7500AY Electric Dryer

1 Answer

It shows 8.8 on the display and will not come on


use a heatin pad or blow dryer near the panel for 10 minutes and it will work. This was the first time that I had it in the garage and had this problem.

Jan 06, 2010 | Maytag Neptune MDE7500AY Electric Dryer

1 Answer

The screen just went blank. It was lit up, but no display. So I turned it off and on a couple of times, to no avail. So I tried to take the battery out and put it back in and now it won't even turn on


well, try recharging the battery and restarting your phone.
the fact that it won;t turn on leads me to believe it's battery.
the blackberry is a really good phone, is it possible the screen could have been damaged in any way. If the LCD is broken without being cracked that could be the issue.
the LCD is plugged into the motherboard and if the phone was dropped could have come unplugged or the LCD could be damaged.
The phone could actually be on and the lcd is blank.
Hard to say about any of it.
You could go to a blackberry provider store and ask them to borrow a battery out of one of their phones and check it.

Jun 17, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

My Maytag dryer won't dry clothes.


Pull the dryer out away from the wall. Unhook the vent from the dryercompletely. Do not put anything over the dryer exhaust on the back ofthe dryer. Do a normal load with the vent unhooked. If it dries betteror ok like this then the problem is in the dryer venting. Like ablocked vent pipe or a smashed or restricted vent hose.
If the vent doesn't make a difference,then check the blower wheel for excessive lint build up, check thatthere isn't anything stuck to the air intake baffle inside the drum,(i.e. the screen on the back wall of the dryer when looking into thedrum). Check the lint filter chute for blockage. Check that the heatingelement isn't shorted to ground. Check the exhaust temperature of the dryer. A meat or pocket thermomter can be used for this. It should cycle between 120 degrees and 160 degrees. Check that the drum seals are not worn out.

Feb 21, 2009 | Maytag Neptune MDE7500AY Electric Dryer

Not finding what you are looking for?
Maytag Neptune MDE7500AY Electric Dryer Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...