Question about HP LaserJet 1320 Printer

Open Question

The light pattern on my HP1320 printer is: Attention light on Ready light blinking on Button blinking Can you tell me th eerror? Thanks.

Posted by on

  • Seeker5211
    Seeker5211 Sep 11, 2010

    Print out the error pattern again. Then push the GO button and write down what the lights are doing. I couldn't find Attention = ON/Ready = BLINKING/GO button = blinking

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Laserjet 1320 shows undocumented light pattern, won't respond

paper jam

Posted on Nov 20, 2007

  • 11 Answers

SOURCE: not printing,attention (4th)light is also blinking

THERE IS A KNOWN ERROR WITH THE P2015 PRINTERS WHERE THEY NEED TO GO BACK UNDER WARRANTY .
THE EPROM ON THE FORMATTER IS BAD HP HAS BEEN TAKING THESE BACK AND REPLACING THE FORMATTER.

Posted on Nov 14, 2008

SOURCE: Attention light blinks after jam

Hi,
most of the HP printers will detect the paper jam and will provide you with help window automatically to rectify the problem. If paper gets jammed, just remove it from backside and then turn off the printer and power it on. cancel any pending printing documents. Everything have to become normal. If it not, try restarting your system too.
I hope its helpful to you

Posted on Sep 07, 2009

seeker5211
  • 1089 Answers

SOURCE: HP2550 problem:The attention light, the

According to your "secondary" light pattern your printer has a Carousel motor error.
You've already power cycled it to no avail.
The next step is to get the motor replaced.

Sorry, I know that you didn't want to hear that.

Posted on Apr 07, 2011

Testimonial: "Thanks so much for the analysis. I suspect you are right. And thanks so much for the rapid feedback. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1102 reser counter


  • I take it you are refilling the toner cartridge...
  • Switch the printer off.
  • Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.
  • Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.
  • Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.
  • Open and close the lid of HP printer once. The light will start blinking.
  • Press the green button. Your HP toner cartridge chip will be reset.
  • Apr 25, 2014 | HEWLETT-PACKARD Hewlett Packard P1102...

    1 Answer

    My 1300 hp printer still all lights on how to resolve problem


    HP LaserJet 1150 and 1300 Series Printers - Understanding and Troubleshooting Control Panel Light Patterns This document explains how to interpret the light patterns on the HP LaserJet 1150 or 1300 series printer control panel. It lists the error conditions, describes the possible causes, and provides steps to resolve the conditions. Description of the control panel The control panel contains two lights and one lighted button. Patterns of light indicate printer status.Figure 1: Location of control panel c00007297.jpg 1 - Ready light 2 - Go button and light 3 - Attention light Figure 2: Light conditions c00007298.jpg 1 - Light off 2 - Light on 3 - Light blinking The following table explains the lights on the control panel. See "Status light patterns " below for an explanation of the light patterns.Light or button Description Ready light Indicates that the printer is ready to print. Go button and light To print a demo page or to continue printing while in manual feed mode, press and release the GO button. Attention light Indicates that a printer media input tray is empty, a print cartridge door is open, a print cartridge is missing, or other errors. Status light patterns This section describes the meaning of the light patterns. If a problem persists, see the flyer that came in the printer box for contact information, or click here to go to "Contacting HP support" below . Ready Light pattern c00007299.jpg Description The printer is ready to print. Action No action is necessary. To print a demo page, press and release the GO button on the control panel. Processing Light pattern c00007300.jpg Description The printer is receiving or processing data. Action Wait for the job to print. Continuable error Light pattern c00007301.jpg Description The printer is in manual feed mode. OR The printer is out of memory. Action The software controls manual feed. If manual feed mode is not wanted, change the setting from the printer properties. See the User Guide for information about changing printer properties. OR Take one of the following actions:
    • The page being printed might be too complex for the printer memory capacity. To continue printing, press and release the GO button. The printer might print a partial page, or the quality might be lower than normal.
    • Lower the resolution. See the User Guide for information about understanding print quality settings and changing print quality settings.
    • Add more memory. See the User Guide for information about installing DIMMs (HP LaserJet 1300 series only).
    If the problem persists: Attention state Light pattern c00007302.jpg Description The printer is in an error state that requires operator intervention or help. The door is open, the media is out, the printer cartridge is installed incorrectly, or the media is jammed. Action
    1. Check that the printer cartridge door is completely closed.
    2. Load media into the correct input tray.
    3. Check that the print cartridge is correctly installed in the printer. (See the user guide for information about changing the print cartridge.)
    4. Check for any media jams and clear them. (See the user guide for information about clearing jams.
    5. Check that the left side panel is completely closed. If the left side panel is completely closed, open the left side panel and push the door sensor. Occassionally, if the left side panel appears closed, the sensor will still remain in the open position, generating this error. Pushing the sensor will shut the door tight, returning the printer to the normal mode.

    Mar 19, 2013 | Office Equipment & Supplies

    1 Answer

    Printing is always blair and i cant view what is printer


    Here is a full story

    HP LaserJet Professional M1130/M1210 MFP - Interpret control-panel light patterns (M1130 Series only) Interpret control-panel light patterns (M1130 Series only) If the product requires attention, an error code appears on the control-panel display. Status-light legend c01993382.gif Symbol for "light off" c01993383.gif Symbol for "light on" c01993381.gif Symbol for "light blinking" Control-panel light patterns Light status Error code State of the product Action All lights are off.

    c01993373.gif The product is turned off. Press the power button to turn on the product. Ready and attention lights blink.

    c01993380.gif The status lights cycle during the formatter initialization period or when the product is processing a cleaning page. No action is required. Wait for the initialization period to end. The product should enter the ready state when the initialization period is finished. Ready light is on.

    c01993421.gif The product is in the ready state. No action is required. The product is ready to receive a print job. Ready light is blinking.

    c01993420.gif The product is receiving or processing data. No action is required. The product is receiving or processing a print job. Ready light is blinking slowly.

    c01993420.gif The product is in low power mode. No action is required. Attention light is blinking.

    c01993418.gif E0 Paper is jammed in the product. Clear the jam. E1 The input tray is empty. Load the tray. E2 A door is open Verify that the print-cartridge door is fully closed. E4 The product memory is full The job is too complex for the product to print. Simplify the job, or divide it into multiple files. E5 The product did not pick up paper from the tray. You might need to clean or replace the pickup roller. H0 The product is in manual-feed mode. Load the correct paper type and size into the input tray. H1 The product is processing a manual duplex job. Load the pages into the input tray to print the second sides. The attention and toner lights are blinking.

    c01993375.gif E3 The print cartridge is missing or is not installed correctly. Install the print cartridge. The toner light is on.

    c01993429.gif The print cartridge has reached the end of its estimated useful life. When the supply has reached this condition, the HP Premium Protection warranty for that supply has ended. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. Attention light is blinking, and ready light is on.

    c01993379.gif The product has experienced a continual error from which it will recover on its own. If the recovery is successful, the product continues to the processing data state and completes the job.

    If the recovery is unsuccessful, the product continues to the continuable error state. Try removing any media from the media path and turning the product power off, and then on again. The attention and ready lights are on.

    c01993388.gif E6

    E7

    E8

    E9 The product has experienced a fatal error from which it cannot recover.
    1. Turn off the product or disconnect the power cord from the product.
    2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product.
    3. Wait for the product to initialize.


    If the error persists, contact HP customer support

    Mar 01, 2013 | HP LASERJET PRO M1132 MFP

    1 Answer

    Is not working more


    Switch the printer off.

    Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.

    Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.

    Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.

    Open and close the lid of HP printer once. The light will start blinking.

    Press the green button. Your HP toner cartridge chip will be reset.

    Jan 29, 2013 | HP DeskJet F4280 All In One Printer InkJet

    1 Answer

    Printer blinking red and showing letter E


    Error description:

    The Attention (red) light is blinking. There are six possible causes that will display the Attention light pattern:

    -Paper out
    -Door open
    -Print cartridge missing
    -Paper jam
    -Paper sensor jammed
    -Duplexer error

    Solution :
    After the cause of the problem has been addressed, pressing GO will cause the printer to attempt to recover from the cause of the error. If the printer is unsuccessful, it will continue to display the Attention message until the cause is remedied.

    Pressing JOB CANCEL will cancel the print job and the printer will return to the Ready state (Ready light on) unless there is a paper jam still in the printer or the print cartridge is not in the printer.

    For more details visit the link below :

    Resolve Printer issue

    Jun 09, 2011 | HP DeskJet F380 All-In-One Printer

    1 Answer

    HP2550 problem:The attention light, the ready light and the go light stay on (not flashing). When I hold the Go and Cancel button down, the attention light and the ready light stay on (secondary light...


    According to your "secondary" light pattern your printer has a Carousel motor error.
    You've already power cycled it to no avail.
    The next step is to get the motor replaced.

    Sorry, I know that you didn't want to hear that.

    Apr 06, 2011 | HP LaserJet 2550L Printer

    1 Answer

    What do symbols on top mean?


    Welcome to Fixya

    Half circle symbol means printer is in ready state. The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status.

    1 Jam light: Indicates that there is a jam in the printer.
    2 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer,
    the Toner light blinks.
    3 Paper out light: Indicates that the printer is out of paper.
    4 Attention light: Indicates that the print-cartridge door is open or other errors exist.
    5 Ready light: Indicates that the printer is ready to print.
    6 Go button and light: Initiates action or indicates status.
    7 Cancel button: To cancel the print job that is currently printing, press the Cancel button.

    Thank you for using Fixya!

    Feb 08, 2011 | HP LaserJet P2015dn Printer

    1 Answer

    When the printer has big green light and a orange light what does this mean?


    Do you mean that the orange attention light is lit and the Go button/light is lit? If the attention light is blinking, then the printer is in manual feed mode or out of memory.

    Put in the media and press the Go button. To reset the media selection, go to the Printer Properties. When printing from an application, click Print and then Properties. From the Printer control panel (Start > Devices and Printers (on recent Windows versions) or Start > Settings > Printers (on older OS versions - prior to XP).) In either case right click on the printer icon and choose Properties or Printing Properties.

    If you have too large a file (too many large images) and are out of memory, stop and cancel this file in the print spooler. Then reprint with a lower resolution. (This is in the Print Quality options. See the above and then the Paper/Quality or Finishing tab) Options will vary depend on the OS. Alternatively, add memory to the printer.

    If the Ready light is also lit, the error depends on the pattern. If the lights are blinking in rotation, then the printer is initializing or printing a test page. If the lights are steady, you have a fatal error. Try unplugging the printer for at least 5 minutes (remove all cords from both the wall, computer and printer for the best chance of clearing the error.) If the error persists, the printer needs service. If all of the lights are blinking together, than you have an accessory problem. Try removing the memory. You may be able to reseat the sticks; alternatively replace the memory.

    I hope this helps.

    Cindy Wells

    Sep 03, 2010 | HP LaserJet 1300 Printer

    3 Answers

    HP P2015 Has Paper LED Solid Lit. Will not go off. Help!


    Hello,

    It seems that none of the printer's sensor is faulty, in fact, the printer has a faulty firmware on the formatter.

    Your printer may need replacement of the formatter board, however, please try the following before swapping the formatter.

    HP LaserJet P2015 Printer Series - Paper Jam Light Solid ISSUE: The HP LaserJet P2015 may come up with Paper Jam Light solid and would show the same light pattern even if the printer is power cycled.
    SOLUTION: The Light pattern is as shown in the diagram below.
    c01553062.jpg
    Perform the following tasks in the order listed.
    1. Reset the printer using the Super NVRAM initialization. The procedure is
    a. Turn off the printer
    b. Press and hold the GO button
    c. Turn on the printer and continue to hold the Go button for at least 50 seconds. During this process the Attention, Ready and Go light turns on. Then the Attention and Ready light turns off, leaving just the Go light illuminated.
    d. Release the Go button. The Go, Attention and Ready lights turn on.
    e. Press and hold the Go button. All lights turn off. During the next three seconds, the Go, Ready and Attention lights turn on in that order, one per second.
    f. Release the Go button to perform the initialization. The control panel lights begin cycling from front to back. After the Super NVRAM initialization process is complete, the printer returns to the ready state.
    2.Unplug the power cord when the printer is on and leave it unplugged for 10 Seconds.
    3. Turn the printer back on.
    If the above steps resolve the issue, then print a configuration page and check the firmware version and the formatter board no.,
    If the firmware version is below: 20080312, then your printer needs to upgrade the firmware, however the firmware can be upgraded only onl those models whole formatter board's third number from left is 0, 1 or 2, eg: JK0xxxx

    If the 3rd number from left of the formatter board no is anything other than 0, 1, 2, then firmware cannot be flashed.

    Please let me know the next update.

    - Nikhil

    Nov 08, 2008 | HP LaserJet P2015dn Printer

    3 Answers

    HP Laserjet 2015 dn


    It means that the printer is in READY State.

    Control panel
    The printer control panel is comprised of six lights and two buttons. The lights produce patterns that
    identify the printer status.
    1 Jam light: Indicates that there is a jam in the printer.
    2 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer,
    the Toner light blinks.
    3 Paper out light: Indicates that the printer is out of paper.
    4 Attention light: Indicates that the print-cartridge door is open or other errors exist.
    5 Ready light: Indicates that the printer is ready to print.
    6 Go button and light: Initiates action or indicates status.
    7 Cancel button: To cancel the print job that is currently printing, press the Cancel button.

    Sep 08, 2008 | HP LaserJet P2015dn Printer

    Not finding what you are looking for?
    HP LaserJet 1320 Printer Logo

    Related Topics:

    69 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...