Question about Juki DNU-1541 Mechanical Sewing Machine

1 Answer

How do you wind a bobbin on a juki 1541s ??? This is a brand new machine to me and I can't figure out how to disable the needle head and wind the bobbin

Posted by on

  • 1 more comment 
  • sqs1011 Sep 11, 2010

    Is there a smaller hand wheel inside the large hand wheel to the right?

  • mwdufresne Sep 11, 2010

    No, there is not a smaller wheel inside the large flywheel.

  • Anonymous Mar 18, 2014

    wind the bobbin of juki 8700

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 109 Answers

Here are two websites that might be of help to you. If you just go to the www.westchestersewing.com they have a "contact us" box and you can send them your question.

http://www.westchestersewing.com/juki/dnu1541/

http://industrial-sewing-machines.com/sewmach/mach_detail.asp?brand=Juki

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Juki LU-563 stopped picking up the bobbin thread, changed needle, took out bobbincase to look for thread, none, still won't sew because of bobbin thread not being picked up.


If you've properly installed a brand new needle that is correct for the machine, threaded it correctly, checked that the bobbin is installed correctly and the bobbin tension threaded properly, most likely the machine is out of time. In other words, the needle is arriving at the bobbin at the wrong time in order to intercept the bobbin. (You can open the bobbin area, hand rotate the handwheel and watch how and where the needle moves in relation to the bobbin to see where and why it is not connecting.) You can search the internet for web sites and videos that discuss machine timing or you can take it for service.

...

Nov 09, 2016 | Juki Sewing Machines

2 Answers

I have juki 1541 industrial machine needle want pick up bobbin thread??


Is your needle inserted correctly? Try taking it out and inserting again. Is your bobbing threaded correctly? Try taking it out and re-threading. You might also try cleaning the bobbin area. The only other think I can think of is that you may have the wrong needle in.

Feb 13, 2015 | Juki DNU-1541 Industrial Walking Foot...

2 Answers

Why does my Juki 1541S not pick up the thread from the bobbin when it is supposed to?


hello Zipporah

please see attached, hope it's helpful for what you are asked about.




24463261-wgkncefifg3vv4ayj2dfgtjn-5-1.jpg






24463261-wgkncefifg3vv4ayj2dfgtjn-5-3.jpg

best regards

May 20, 2014 | Juki DNU-1541 Mechanical Sewing Machine

1 Answer

I have a Juki 1541s the needle will not catch the bobbin


At this point I would take the manual and do a proper 'take apart and clean' on it. I have had this happen as well, and most often, even tho I don't see the creator of the issue, cleaning/oiling makes it fine. And make sure you use a good sharp needle. Nothing worse to make a machine not work correctly in a bad needle. Tighten up the needle in the machine as well. There could be fuzz on the hook within the machine.

Mar 05, 2014 | Juki Sewing Machines

1 Answer

Juki, DNU-1541S: thread was not picking up the bobbin thread. The hook shaft is not moving... After trying to move the needle in a reverse motion... Now the hand wheel will not move it is frozen in place.


You've got something binding in the bobbin area. Open up the entire bobbin/feed dog area plates so you can really see. Get your magnifying glass out and really examine the area for threads wound around things. DO NOT unscrew anything if you can help it. If you unscrew the wrong thing you can knock it completely out of time. (which may be why couldn't get the bobbin thread up anyway.)

If all this is intimidating to you... take it for repair.

Sep 09, 2012 | Juki DNU-1541 Mechanical Sewing Machine

1 Answer

Filling the bobbin with my Juki DDL-5550-6


It's actually designed that way on purpose so you can wind a bobbin while sewing. If you lift the presser foot, at least it'll make less noise in the process.

Feb 25, 2009 | Juki DDL-8300

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Pete Alaniz

Level 1 Expert

13 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...