Question about Hotpoint Washing Machines
The code F12 means the following:
F12 - No mixed fill. It is likely that the water is not turned on at the taps.
here is a link to all hotpoint error codes:
If this helps please rate me
Posted on Sep 10, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F01 is a motor faulty normally caused by the module,but sometimes thewiring to the motor plug that works loose as its to tight,give them alla good wiggle make sure there all in!
check this link for other error codes of hotpoint machines
Posted on Dec 15, 2008
SOURCE: error code f5
I think you mean error F05 for a Hotpoint washer.
it means the pressure switch is jammed on full, check pump is working o/k and if there is a filter, remove and clean it, see user instructions..
If still no joy, then you will have to call an engineer..
Plz rate this solution.
Posted on Jan 03, 2009
SOURCE: error code F-08
The meaning of F08 is that the heater relay is stuck or cannot be activated for some reason, this has the effect of stopping the water heater from working.
In order to resolve this the only thing you can do is to test the heater, and see if it is o/k.,if it is , then you there is not much else you can do, except call an engineer.
Hoep this resolves your issue. God Bless.
Posted on Jul 09, 2009
Error F05 indicates pressure switch jammed on full.
Remove lower rear cover of washer.
Locate and remove large black hose fastened to drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.
This should solve the problem.
Posted on Jan 10, 2010
Tips for a great answer:
Sep 28, 2011 | Hotpoint Ultima WF860 Front Load Washer
May 27, 2009 | Hotpoint Ultima WD72 Front Load...
Apr 12, 2009 | Hotpoint Ultima WF860 Front Load Washer
Jan 29, 2009 | Hotpoint Ultima WF860 Front Load Washer
Jan 17, 2009 | Hotpoint Ultima WD72 Front Load...
Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...
Dec 14, 2008 | Hotpoint Ultima WF865 Front Load Washer
834 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: